K10TDD001A - Si-tex Echonautics K10TDD001A fairing Block for CB101 Transducer

Hydrodynamic Fairing Block for CB101 Series Transducers

Echonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the installation of any traditional stem transducers to the vessel's hull to protect the transducer and guarantee excellent performance while the vessel is underway. The fairing block helps to ensure a bubble-free flow of water across the face of the transducer. 

Fairing blocks are required for the transducer to match the deadrise angle at the vessel mounting loca­tion. The fairing block is used to match the deadrise angle by orienting the transducer's sound beam straight down by mounting the transducer parallel to the water surface. 

Echonautics high-performance fairing blocks are made of high-impact polymer and designed for excellent transducer performance even at speeds above 15kn (17MPH). 

What's In The Box?

• High-Performance Fairing Block model CB101 / CB131
• Anti-rotation bolt with nut, washer, and round tap
• Warning and Installation Manual

The SI-TEX Echonautics K10TDD001A is a hydrodynamic fairing block designed for the thru-hull installation of traditional stem transducers. This component is intended for IT and marine professionals responsible for vessel electronics installations, particularly those utilizing CB101 series transducers. Its primary function is to protect the transducer and maintain optimal performance, especially when the vessel is underway. The fairing block ensures a bubble-free water flow across the transducer face, which is critical for accurate readings. It also allows the transducer to be mounted parallel to the water surface, correcting for the vessel's deadrise angle and orienting the sound beam straight down. Constructed from high-impact polymer, this fairing block supports transducer performance at speeds exceeding 15 knots (17 MPH).