96132 - Star Brite Instant Hull Cleaner - Easy to Use Gel Formula - 32 oz

Instant Hull Cleaner - Easy to Use Gel Formula - 32 oz 

New Gel formula "sticks" where applied for maximum cling time and cleaning power. Spray onto the surface being cleaned. The use of rubber gloves is recommended. Allow to remain on the surface until the stain disappears, then rinse thoroughly with fresh water. Stubborn stains or spots may require a repeated application with longer soak time and gentle scrubbing. For best results, use when the temperature is over 50°F. To shine and protect the newly cleaned hull, apply any of Star brite’s Marine Polishes.

Directions:

Spray onto the surface being cleaned. Use of rubber gloves is recommended. Allow to remain on the surface until the stain disappears, then rinse thoroughly with fresh water. Stubborn stains or spots may require a repeated application with longer soak time and gentle scrubbing. For best results, use when the temperature is over 50°F. To shine and protect a newly cleaned hull, apply any of Star brite®’s Marine Polishes. NOTE: Avoid contact with fabrics and anti-fouling bottom paint as the product may cause discoloration. Some inferior quality decals may be discolored by this product; care must be taken to keep spray or drips off of these surfaces. Take precautions to prevent contact with boat trailers and any other surfaces that are not intended to be cleaned. Star brite’s liability is limited to the purchase price of this product.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Star brite Instant Hull Cleaner (part number 96132) is a 32 oz gel-formula liquid cleaner designed for marine hull maintenance. This product is intended for businesses or individuals requiring an efficient solution for removing stains from boat hulls. Its gel consistency is engineered to adhere to surfaces, allowing for extended contact time and targeted cleaning. Users can apply the cleaner by spraying it onto the stained area, letting it sit until the stain dissipates, and then rinsing with fresh water. For more persistent stains, a second application with a longer soak time and light scrubbing may be necessary. Optimal performance is achieved when the ambient temperature is above 50�F. This cleaner addresses the common issue of hull discoloration and staining, providing a direct method for surface restoration. It is suitable for those seeking a practical cleaning agent for marine environments.