G482-Z50 - Gigabyte Server G482-Z50 4U AMD EPYC 7002 SP3 DDR4 10x2.5HS HDD SSD Retail

Dimensions
4U Motherboard
MZ52-G40 CPU
AMD EPYC^TM 7002 series processor family
Dual processors, 7nm
Up to 64-core, 128 threads per processor
TDP up to 225W, cTDP up to 240W

Fully support 280W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

Compatible with AMD EPYC^TM 7001 series processor family Socket
Socket SP3 Chipset
System on Chip Memory
32 x DIMM slots
DDR4 memory supported only
8-Channel memory per processor architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200^note/ 2933 MHz

- Note: Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC LAN
Rear Side:
2 x 10Gb/s BASE-T LAN ports (Intel X550-AT2)
1 x 10/100/1000 management LAN

Front Side:
2 x 1Gb/s BASE-T LAN ports (Intel I350-AM2) Video
Integrated in Aspeed AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp, DDR4 SDRAM Storage
12 x 3.5" hot-swappable HDD/SSD bays
- Compatible with SATA/SAS devices only
10 x 2.5" hot-swappable HDD/SSD bays
- 8 x amber HDD trays compatible with NVMe or SATA/SAS devices
- 2 x blue HDD trays compatible with SATA/SAS devices only

Pre-install with Broadcom SAS3008 storage adapter with IR mode and expander board
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port SATA
Supported SAS
Supported RAID
Pre installed Broadcom SAS3008 SAS Card
Software RAID, IR mode, RAID 0/1/1E/10 Peripheral Drives
- Expansion Slots
10 x PCIe x16 slots (Gen3 x16 bus) for GPUs
1 x PCIe x16 (Gen3 x8 bus) Half-length low-profile slot in front, occupied by CRA3338 HBA

1 x PCIe x16 (Gen3 x16 bus) Half-length low-profile slot in rear side ^note
Note: Non-supported SAS Card with internal cable due to cable routing limitation

- System is validated for population with a uniform GPU model
- Support is not provided for mixed GPU populations Internal I/O
1 x TPM header
1 x Front panel header Front I/O
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN (Reserved, enabled by jumper switch)
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD access LED Rear I/O
2 x RJ45
1 x MLAN (Primary port) Backplane I/O
12 x 3.5" ports and 10 x 2.5" ports TPM
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010 Power Supply
3 x 2200W redundant PSUs
80 PLUS Platinum

AC Input:
- 100-127V more / 14A, 47-63Hz
- 200-240V more / 12.6A, 47-63Hz

DC Output:
- Max 1200W/ 100-127V more
+12.12V/ 95.6A
+12Vsb/ 3.5A
- Max 2200W/ 200-240V
+12.12V/ 178.1A
+12Vsb/ 3.5A

NOTE: The system power supply requires C19 type power cord