The Fortress G-125 Guardian Anchor is a 65lb anchoring solution designed for marine vessels ranging from 63 to 72 feet in length. This anchor is suitable for boats of average windage and proportions operating in typical conditions, including winds up to 30 knots, average bottom conditions, and moderate protection from open seas. It provides a holding power of 18,000 lbs in hard sand and 3,600 lbs in soft mud. Key dimensions include a 53-inch shank, 31-inch fluke, and 43-inch stock. For optimal performance, it requires a 1/2-inch proof coil chain, 1-inch nylon rope, and a 5/8-inch shackle. This anchor addresses the need for reliable vessel securement in standard operational environments, with recommendations to scale up for storm conditions or increased wind loads.
The G-125 anchor is recommended for boats between 63 and 72 feet (19-22 meters) in length. This recommendation applies to boats with average windage and proportions in 30 knots of wind, average bottom conditions, and moderate protection from open seas.
For proper deployment, this anchor requires a 1/2-inch (13mm) proof coil chain, 1-inch (25mm) nylon rope, and a 5/8-inch (16mm) shackle. It is also recommended to use 6-12 feet (2-4 meters) of chain and a minimum of 5:1 scope.
The G-125 anchor has a holding power of 18,000 lbs (8,165 kg) in 32-degree hard sand and 3,600 lbs (1,633 kg) in 32-degree soft mud. These figures represent loads achieved under controlled horizontal pull conditions without dragging.
Yes, for storm conditions, it is recommended to use an anchor one or two sizes larger than the standard recommendation. Loads in 42 knots of wind are twice as much as in 30 knots, necessitating a larger anchor for increased security.
G-125 - Fortress Marine Anchors Fortress G-125 65lb Guardian Anchor f/63'-72' Boats