Fsp Group FSP300-50FCB FSP PS FSP300-50FCB 300W +5V +12V 80 Plus Gold 47 to 63Hz UL62368 Bulk Pack

WATTAGE
300W GENERAL SPECIFICATION
Efficiency
115VAC: Full load (100%) 87% Typical load (50%) 90% Light load (20%) 87%
230VAC: Full load (100%) 87% Typical load (50%) 90% Light load (20%) 87%
INPUT ELECTRICAL SPECIFICATION
Input Frequency
47 to 63 Hz
Input Current
115V at 6 Amps rms maximum
230V at 3 Amps rms maximum
OUTPUT SPECIFICATION
Hold-up time
115V / 60Hz : is more than or equal to 10ms
230V / 50Hz : is more than or equal to 12ms
Ripple and Noise
Load 1 - 7
+5V: 7.48A 3.74A 1.5A 14A 8A 0A 0A
+12V: 18.62A 9.31A 3.72A 0.1A 10A 24A 0.1A
Over Current Protection
5V 25 to 45A
Short Circuit Protection
Load < 0.1 Ohm
ENVIRONMENTAL REQUIREMENT
Temperature Range
Operating: 0 to +50 deg.
Storage: -40 to +80 deg. C
Humidity
Operating: 85% RH, Non-condensing
Storage: 95% RH, Non-condensing
MTBF
The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25^oC, maximum-output load, and nominal AC input voltage.
SAFETY
CE FCC OCP SCP
AC INPUT
100-240V-,6-3A,60-50HZ
DC OUTPUT
+3.3V
12.0A
MAX WATTAGE : 70W MAX
+5V
14.0A
MAX WATTAGE : 70W MAX
+12VA
25.0A
+5Vsb
3.0A
-12V
0.3A
TOTAL OUTPUT CONTINUOUS SHALL NOT EXCEED
300W
FEATURES
80 Plus Gold
Low Ripple and Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
100% burn-in under high ambient temperature(50^oC)
Vacuum-impregnated transformer
MTBF:100K hours at 25^oC
100% Hi-pot tested
Line input fuse protection
Item Dimension (L"xW"xH")
25 x 11 x 9
Weight
26.00 LB
Warranty Information
3 year