29+Years
29+Years
3 Available
Condition: New
Dress White 2" Hourmeter (Digital)
Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens.
Hourmeter operates by applying battery voltage across the gauge's register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch to count "engine running" hours.
2"- Hole Size: 2.0625" (53mm)
Specifications:
Factory P/N MH0240
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.The Faria Beede Instruments Dress White 2" Digital Hourmeter, part number 13130, is designed for tracking operational hours in various 12 VDC negative ground systems. It features a perimeter-lighted white dial with clear black graphics, a white aluminum bezel, and a flat glass lens. This hourmeter operates by registering increments when battery voltage is applied, typically via a key switch. For precise engine running hour tracking, it can be wired through a normally open oil pressure switch. The unit has a 2.0625" (53mm) hole size and a scale up to 10,000 hours. It is adaptable for 24 VDC systems, making it suitable for a range of industrial or marine applications requiring accurate hour logging for maintenance scheduling or operational oversight.
2 Hourmeter (Digital) 10,000 Hours 12-32VDC Dress White - Retail Package
Hole Size: 2
Perimeter-lighted black dial with bold white graphics, black aluminum SAE style bezel, contoured white pointer and flat glass lens.
Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
Features:
The hourmeter is designed for 12 VDC negative ground systems and can be adapted for use with 24 VDC systems.
This hourmeter has a scale that tracks from 0 up to 10,000 hours.
The hourmeter requires a 2-inch hole size, specifically 2.0625" (53mm), for installation.
The product includes the individual hourmeter unit. A gauge cover is not included.
13130 - Faria Beede Instruments Faria Dress White 2" Hourmeter (Digital)
