Ezcords EZC-EZ80003333 4-Port Analog Cheater Ethernet Splitter Cable

The 4-Port Analog Cheater Ethernet Splitter Cable is a universal wiring harness designed to work with any 568A or 568B network cabling standard. This 12-inch cable allows you to split a standard single Ethernet cable into four separate circuits, eliminating the need for additional cables during expansion.

Simply plug the male connector into an outlet on your 'House' patch panel (near your data switch or router), and connect devices using four different signals like Single Line Telephones, Central Office Trunks, or Digital PBX extension circuits that utilize Pins 4 & 5 (compatible with systems like NEC and Avaya).

At the destination location, connect another cheater cord into the wall outlet to break down the signals into four separate jacks and circuits:

• Jack #1: Pins 4 & 5 for C.O. Trunks, 2-wire telephones, Fax Machines, Modems, POS, and other devices using the center pair.
• Jack #2: Pins 4 & 5 for C.O. Trunks, 2-wire telephones, Fax Machines, Modems, POS, and other devices using the center pair.
• Jack #3: Pins 4 & 5 for C.O. Trunks, 2-wire telephones, Fax Machines, Modems, POS, and other devices using the center pair.
• Jack #4: Pins 4 & 5 for C.O. Trunks, 2-wire telephones, Fax Machines, Modems, POS, and other devices using the center pair.

Each cheater cord features an 8-pin RJ45 plug and four 8-pin RJ45 jacks, clearly color-coded in black with the label '2W-TEL' for easy identification.