Qnap ES2486DC-2142IT-96G NAS ES2486dc-2142IT-96G-US 3U 24Bay 48GB Xeon D-2142IT 1.9GHz 8Core

<b>CPU</b><br>Intel Xeon D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller <b>CPU Architecture</b><br>64-bit x86 <b>Floating Point Unit</b><br>Yes <b>Encryption Engine </b><br> Yes (AES-NI) <b>System Memory</b><br>48 GB RDIMM DDR4 ECC (4 x 4 GB+4 x 8GB) per controller <b>Maximum Memory</b>,br.512 GB (8 x 64GB) <b>Memory Slot</b><br>8 x R-DIMM/LR-DIMM DDR4 <br>IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory. <b>Flash Memory</b><br>4GB (Dual boot OS protection) <b>Drive Bay</b><br>24 x 2.5-inch <br>SAS 12Gb/s, backward-compatible to SAS 6Gb/s <b>Drive Compatibility</b><br>2.5-inch bays: <br>2.5-inch SAS/SATA hard disk drives<br>2.5-inch SAS/SATA solid state drives<br>1. When installing SATA HDD/SSD, QDA-SA3 adapter is required. <br>2. The QDA-SA3 adapter is designed for QNAP Enterprise ZFS NAS and allows the use of a SATA 6Gbps drive in a 2.5-inch SAS drive bay <b>Hot-swappable </b><br>Yes <b>SSD Cache Acceleration Support </b><br>Yes <br>Read cache only <b>Cache for Copy To Flash (C2F)</b><br>1 per each controller (64GB) <b>Gigabit Ethernet Port (RJ45)</b><br>3 for each controller (one for remote management) <b>10 Gigabit Ethernet Port</b><br>4 x 10GbE SFP+ for each controller <b>Wake on LAN (WOL) </b><br>Yes <b>Jumbo Frame</b><br>Yes <b>PCIe Slot</b><br>2 <br>Slot 1: PCIe Gen 3 x8 (CPU) <br>Slot 2: PCIe Gen 3 x8 (CPU) <b>USB 3.2 Gen 1 port</b><br>2 per each controller <b>Form Factor</b><br>2U Rackmount