General InformationFlexible and economic solution for 10GbE adoption Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.Interfaces/PortsHost Interface: PCI Express 3.0 x4Total Number of Ports: 1Number of Network (RJ-45) Ports: 1Media & PerformanceMedia Type Supported: Twisted PairNetwork & CommunicationNetwork Technology: 10GBase-TPhysical CharacteristicsForm Factor: Plug-in CardHeight: 3.4"Width: 2.7"Depth: 0.5"MiscellaneousDevice Supported: NAS Storage Device
Technical Specifications
General Specifications Standards IEEE 802.3an 10Gbps Ethernet IEEE 802.3bz 2.5Gbps/ 5Gbps Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control Data Transfer Rates 10 Gbps Network Operation Mode Full Duplex Supported Features 9 KB Jumbo Frame TCP/UDP/IP Checksum Offloading Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s Applied Models FS3017 FS2017 FS1018 RS18017xs+ RS18016xs+ RC18015xs+ RS10613xs+ RS4017xs+ RS3617xs+ RS3614xs+ RS3413xs+ RS3618xs RS3617RPxs RS3617xs RS3614(RP)xs RS3412(RP)xs RS3411(RP)xs DS3617xs DS3615xs DS3612xs DS3611xs DS3018xs RS2818RP+ RS2418(RP)+ RS1219+ RS818(RP)+ DS1817+ DS1618+ DS1517+ Note DSM version requirement: 6.2-23739-2 onward (or 6.1-15284-2 onward with DSM 6.1) Hardware Specifications PCIe Interface PCIe 3.0 x4 Bracket Height Low Profile and Full Height Operating Temperature 0oC to 40oC (32oF to 104oF) Storage Temperature -20oC to 60oC (-5oF to 140oF) Relative Humidity 5% to 95% RH Item Dimension (L"xW"xH") 4 x 3 x 1 Weight 1.00 LB Warranty Information 5 Years
