DVO 101110008 - Diversey High Mileage ProX - For Hard Floor, Polished Surface, Glazed Surface, Ceramic Tile Floor - Read

High Mileage® ProX Floor Finish delivers excellent gloss build and outstanding durability for your floors, even in the heaviest of traffic.

• Dirt Remover
• Black Mark Remover
• Scratch Remover

• Blockade areas to be stripped or finished. Floors will be very slippery until dry.
• Strip floors, using a Diversey stripper per the instructions on the stripper label.

Coating

• Apply 3 or more medium coats using a clean finish mop or the Diversey ProSpeedTM/MC or TrailBlazerTM/MC Floor Finish Applicator System. Apply additional coats until desired gloss is obtained.
• Allow 30-45 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Allow finish to cure for 24 hours before burnishing.

Maintenance

• Dust mop or sweep. Clean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner according to label directions.
• If desired, dry buff using medium to aggressive pad and 1000- 500 rpm equipment. Ultra-high speed burnish using a medium aggressiveness pad and 2000+ rpm equipment.

Recoating

• Dust mop or sweep.
• Clean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner according to label directions.
• Blockade area and apply 1-2 uniform coats of finish using a clean finish mop or the Diversey ProSpeedTM/MC or TrailBlazerTM/MC Floor Finish Applicator System. Allow finish to cure for 24 hours before burnishing.

Removal

• Remove using recommended Diversey brand stripper following label directions.

Precautions

• Do not dilute. Do not use on surfaces colder than 50°F (10°C) @ 15% RH. To avoid contamination, do not return unused finish to original container. Do not freeze.

• Hard Floor
• Polished Surface
• Glazed Surface
• Ceramic Tile Floor

• Low Odor
• Non-yellowing
• Durable
• Slip Resistant

• White
• Clear