DVO 101105268 - Diversey Wide Range II Disinfectant Cleaner - For Multi Surface - Concentrate - Liquid - 84.5 fl oz (2.6

Non-acid disinfectant washroom cleaner concentrate for use on washable hard, non-porous surfaces.

• HIV-1 Human Immunodeficiency Virus Type 1
• Hepatitis C Virus (HCV)
• Escherichia Coli
• Methicillin-resistant Staphylococcus Aureus (MRSA)
• Vancomycin-resistant Enterococci (VRE)
• Norovirus

• Grit Remover
• Soap Scum Remover

Use Instructions

• Preparation of Disinfectant Use-Solution: Add 2 oz. per gal. of water (1:64).

Disinfection/Virucidal/Fungicidal/Mold and Mildew Control Directions

• Apply use-solution to hard, non-porous surfaces, thoroughly wetting the surfaces, with a cloth, mop, sponge, sprayer or by immersion. Treated surfaces must remain wet for 10 minutes. Wipe dry with a cloth, sponge or mop or allow to air dry.
• For heavily-soiled areas, a preliminary cleaning is required.
• Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware and dishes.
• For sprayer applications, use a coarse spray device. Spray 6 - 8 inches from surface; rub with brush, sponge or cloth. Avoid breathing spray.
• For fungicidal activity, this product is an effective fungicide against Trichophyton mentagrophytes (the athlete's foot fungus) in areas such as locker rooms, dressing rooms, shower and bath areas and exercise facilities. This product is a one-step fungicide at 2 oz. per gal. of water in 200 ppm hard water and 5% serum.
• For mold and mildew: At 2 oz. per gallon, this product will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard, non-porous surfaces. Follow disinfection instructions. Repeat treatment every seven days, or more often if new growth appears.
• This product is not for use on medical device surfaces.
• Prepare a fresh solution daily or more often if the use solution becomes visibly diluted or soiled.

Non-Acid Toilet Bowl and Urinal Disinfectant/Cleaner Directions

• Remove gross filth prior to disinfection.
• From Use Solution: Empty toilet bowl or urinal and apply a 2 oz. per gallon use-solution to exposed surfaces and under the rim with a cloth, mop, sponge or sprayer. Brush or swab thoroughly, allow to stand for 10 minutes and flush.
• To Clean and Deodorize: Mix 2 oz. per gallon of water to clean and deodorize surfaces. Apply using a cloth, mop, sponge or sprayer. Wipe or allow to air dry

• Deodorize
• Pleasant Scent