DVO 101104658 - Diversey Linoleum/Stone Stripper - For Multi Surface - Liquid - 640 fl oz (20 quart) - 9.8 pH - Solvent

LinoSAFE® Linoleum/Stone Stripper efficiently removes existing floor finish on linoleum, rubber, marble and other sensitive substrates. Concentrate will not damage or discolor sensitive substrates with proper use. Apply with a mop. Dilution ratio is 1:4.

• For Heavy Buildup: Mix 1 part LinoSAFE® Stripper to 4 parts cool water.
• For Light to Medium Buildup: Mix 1 part LinoSAFE® Stripper to 6 parts cool water.
• Blockade areas to be stripped or sealed. Floors can become very slippery when stripper is applied. Exercise caution.
• Apply liberal amounts of solution uniformly on floor with mop. If splashing occurs, wipe off surfaces with a clean rag dampened by water.
• Let stripper solution soak in for 10-15 minutes. Keep areas to be stripped wet. Mop agitate midway through soak time.
• Scrub thoroughly using a green pad or soft brush to break-up film.
• Pick-up all of the solution with a clean mop, wet vac or an automatic scrubber.
• Thoroughly rinse floor with clear water.
• Let floor completely dry before applying LinoBASE® Sealer (linoleum only) or Diversey brand floor finish.

Please make sure your employees read and understand the product label and Safety Data Sheet before using this product. The label contains directions for use; and both the label and SDS contain hazard warnings, precautionary statements and first aid procedures. SDS are available online at www.diversey.com or by calling 888.352.2249. Improper use or dilution may result in damage to surfaces and may result in health and physical hazards that match those of the concentrate.