29+Years
29+Years
83 Available
Condition: New
The Betco Finish 101 Acrylic Polymer Floor Finish is a concentrated liquid solution designed for maintaining resilient tile flooring and properly prepared hard surfaces. This product, identified by part number BET 696B500, is suitable for businesses and IT environments requiring a durable floor finish. It comes in a 640 fl oz (20 quart) bag and features a mild scent. The finish is formulated to address issues such as heel marks and general wear on high-traffic floors. It can be applied in multiple coats for restorative maintenance after stripping old finishes, or used for routine and interim maintenance to enhance gloss and protect surfaces. The product's pH ranges from 8.1 to 8.9, and its composition includes bleach and chlorine. It is intended for use in various settings, including education and retail, where floor appearance and protection are necessary.
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply floor finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE: Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
This floor finish is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
Apply the floor finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop, or applicator system. Allow each coat to dry thoroughly before applying additional coats.
Each coat typically dries in 20-30 minutes, though elevated temperatures, heavy coats, and humidity may extend this time.
The product comes as a concentrate in a 640 fl oz (20 quart) bag.
BET 696B500 - Betco Corporation Betco Finish 101 Acrylic Polymer Floor Finish - Concentrate - 640 fl oz (20 quart) - Mil
