29+Years
29+Years
31 Available
Condition: New
The BetcoBest LM Floor Finish is a liquid floor care product designed for use on resilient tile flooring and properly prepared hard surfaces. This finish, available under part number BET 644B500, is formulated to provide a high gloss with resistance to powdering, black marks, scuffs, and heel marks. It is suitable for high-traffic environments where maintaining floor appearance is critical. The product features a mild scent and a crystal clear, opaque finish that clarifies upon drying, serving as an application indicator. Each unit contains 640 fl oz (20 quart) and covers approximately 2,000 to 3,000 square feet per gallon. Drying time between coats is 20 to 30 minutes, with 2-3 coats typically recommended for optimal results. This finish aims to reduce labor by requiring fewer coats and minimal burnishing compared to some conventional products.
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, medium to medium-heavy coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. 2 - 3 coats are recommended.
NOTE: This product contains an opaque application indicator that will clarify when drying. This is a self-sealing finish; however, if tile is old, worn or porous a Betco floor sealer can be used.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop the floor. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty container. NOTE: Slip resistance meets or exceeds (ASTM D 2047-11) James Machine 0.5 minimum.
This floor finish is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces. If tile is old, worn, or porous, a Betco floor sealer can be used prior to application.
Each package contains one unit of BetcoBest LM Floor Finish, with a volume of 640 fl oz (20 quart).
This floor finish is designed for high-traffic applications, offering resistance to powdering, black marks, scuffs, and heel marks. It aims to maintain a high gloss with minimal burnishing, reducing the frequency of extensive floor care.
One gallon of BetcoBest LM Floor Finish covers approximately 2,000 to 3,000 square feet. Each unit contains 20 quarts, equivalent to 5 gallons.
BET 644B500 - Betco Corporation Betco BetcoBest LM Floor Finish - For Floor, Tile, Hard Surface - Liquid - 640 fl oz (20
