29+Years
29+Years
37 Available
Condition: New
The Betco Hi-Tech Metal Interlocked Floor Finish, part number BET 610B500, is a liquid floor finish supplied in a 640 fl oz (20 quart) volume. This product is formulated for use on all types of resilient tile flooring and properly prepared hard surfaces. It is designed to achieve performance in high-speed maintenance programs, offering a self-sealing and self-leveling application. The finish is slip-resistant, meeting or exceeding the ASTM D 2047-11 standard. It is suitable for environments requiring a durable floor coating that resists powdering, scuffing, and black marks, while also providing an enhanced wet-look shine after burnishing. The product covers 2,000 to 3,000 square feet per gallon with a drying time of 20 to 30 minutes per coat, making it practical for IT hardware resellers and their clients managing facility maintenance.
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
This floor finish is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces. It also provides adhesion to poured, rubber sport floors.
The Betco Hi-Tech Metal Interlocked Floor Finish covers 2,000 to 3,000 square feet per gallon. The drying time for each coat is typically 20 to 30 minutes, though this can be extended by elevated temperatures, heavy coats, or humidity.
Yes, this floor finish is designed to be slip-resistant. It meets or exceeds the ASTM D 2047-11 standard for slip-resistance, with a James Machine 0.5 minimum.
For restorative maintenance, completely remove all old wax, finish, and soil. Apply the finish in uniform, thin to medium coats, allowing each to dry thoroughly (20-30 minutes). A minimum of 4 coats is recommended. For old, worn, or porous tile, applying 1-2 coats of a Betco sealer beforehand can enhance gloss and long-term performance.
BET 610B500 - Betco Corporation Betco Hi-Tech Metal Interlocked Floor Finish - 640 fl oz (20 quart) - Mild Scent - Self-
