29+Years
29+Years
Special Order
Ships in 1-2 weeks
Condition: New
The Betco Sure Cure Floor Sealer & Finish (BET 6090400) is a ready-to-use, water-based liquid floor treatment designed for protecting and enhancing hard-surface floors. This product is suitable for IT environments, commercial spaces, and facilities management where durable floor protection is required. It provides long-lasting protection and abrasion resistance for various surfaces, including new and old concrete, slate, quarry tile, terrazzo, and marble. The formulation is resistant to a variety of chemicals and offers exceptional ease of maintenance, eliminating the need for etching prior to application. It dries clear with a high gloss from a milky white liquid, and its high solids content can reduce the number of coats needed. This sealer and finish is intended for indoor use, providing a durable, strippable, and labor-saving solution for floor care.
Recommended for use on all types of stone flooring (brick, marble, slate, terrazzo and concrete-new and old), resilient tile, quarry and non-glazed ceramic tile.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 30 - 45 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above. Please recycle empty containers.
CONCRETE APPLICATION:
May be applied to new concrete after 30 days (fully cured) and a surface temperature above 50 °F. Prior to applying sealer to new concrete, use an acidic solution to neutralize excess alkalinity. All new concrete must be cleaned and rinsed. Not for use outdoors. Old concrete must be cleaned with a degreasing solution and rinsed for proper adhesion.
GLAZED TILE/POLISHED SURFACES:
1. Test in an inconspicuous area first, proper adhesion may be difficult due to lack of porosity.
Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
BET 6090400 - Betco Corporation Betco Sure Cure Floor Sealer & Finish - For Multi Surface - Ready-To-Use - Liquid - 128
