29+Years
29+Years
56 Available
Condition: New
The Betco Glare Floor Finish, part number BET 605B500, is a commercial-grade liquid floor finish designed for IT environments, offices, and other B2B settings requiring durable floor maintenance. This product is formulated to provide a high-gloss, slip-resistant surface on resilient tile flooring and properly prepared hard surfaces. It addresses common facility management challenges by offering resistance to black marks and detergents, contributing to a cleaner appearance and reduced maintenance frequency. The finish is also gloss-resistant, helping to maintain its aesthetic over time. With a mild scent and a volume of 640 fl oz (20 quart), this floor finish is suitable for large-area applications. It is easily applied and maintained, supporting both restorative and routine floor care protocols. This product is intended for facility managers and maintenance teams seeking a reliable solution for maintaining professional floor aesthetics and safety standards.
Directions for Use
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum
The Betco Glare Floor Finish is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
One gallon of Betco Glare Floor Finish covers approximately 2,000 to 3,000 square feet.
This floor finish is designed to be durable, slip-resistant, gloss-resistant, black mark resistant, and detergent resistant.
A minimum of 4 coats of finish is recommended for initial application, with each coat allowed to dry thoroughly for 20-30 minutes.
BET 605B500 - Betco Corporation Betco Glare Floor Finish - 640 fl oz (20 quart) - Mild Scent - 1 Each - Durable, Slip Re
