29+Years
29+Years
17 Available
Condition: New
The Betco LiquiShield Concrete Guard (BET 16790400) is a ready-to-use, water-based liquid cleaner designed for IT environments and facilities with polished concrete, terrazzo, and other porous stone surfaces. This product is formulated to enhance gloss and provide protection against stains and etching, reducing the need for traditional floor finishes. It is suitable for businesses seeking a low-odor solution for maintaining high-traffic areas, as it resists scuffs, black marks, and soil without peeling, flaking, or discoloring. Application involves two coats, covering 3,000 to 4,000 square feet per gallon, with a drying time of 45-60 minutes per coat. The guard is applied using a low-pressure sprayer and spread with a microfiber applicator pad or mop and bucket, followed by high-speed burnishing. It is intended for IT managers and facilities personnel responsible for floor maintenance in data centers, server rooms, and office spaces with hard flooring.
Recommended for polished concrete and terrazzo surfaces for extended stain and etch protection. Clean entire area with Betco DensiClean, allow floor to dry prior to application. Apply Betco LiquiShield at proper application rate, 3,000 to 4,000 sq. ft. per gal, with a low-pressure sprayer spread with a microfiber applicator pad or mop and bucket application. Allow to dry to touch, 45 to 60 minutes, then apply second coat using the same procedures. Allow second coat to dry 60 minnutes then high speed burnish with Betco Si Burnish Pad. Allow 1 to 2 hours cure time before floor is exposed to full traffic. Allow 24 hours before the use of cleaners on the floor. Maintain floor with Betco Crete Rx DensiClean and Betco Crete Rx Cleaning Pads for maximum protection and shine.
This product is recommended for polished concrete and terrazzo surfaces, as well as other porous stone surfaces, to provide extended stain and etch protection.
Betco LiquiShield Concrete Guard covers 3,000 to 4,000 square feet per gallon, and only two coats are required for application.
Each carton contains four 128 fl oz (4 quart) containers of Betco LiquiShield Concrete Guard.
The water-based, low-odor formula makes the product easy to apply and suitable for use in environments where strong chemical odors are undesirable, such as IT facilities or offices.
BET 16790400 - Betco Corporation Betco LiquiShield Concrete Guard - Ready-To-Use - 128 fl oz (4 quart) - 4 / Carton - Wa
