TYAN B8252T75AV18E8HR-2T, AMD EPYC 7003 SERIES - 3RD GEN
Technical Specifications
System Form Factor 2U Rackmount Chassis Model TS75A Motherboard Name S8252GM2NE-2T Motherboard Notification The motherboard not sold separately Front Panel Buttons (1) RST / (1) ID / (1) PWR w/ LED LEDs (1) HDD / (2) LAN / (1) ID / (1) BMC event I/O Ports (2) USB 3.1 Gen1 ports External Drive Bay Qty / Type (18) 2.5" Hot-swap SSD/HDD + (8) NVMe HDD Backplane Support SAS 12Gb/s /SATA 6Gb/s /NVMe Supported HDD Interface (18) SATA 6Gb/s + (8) NVMe Notification The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. System Cooling Configuration FAN (6) 6cm fans Power Supply Type CRPS Input Range AC 100-127V/12A / AC 200-240V/9.48A Frequency 50-60 Hz Output Watts 1,600 Watts Efficiency 80 plus Platinum Redundancy 1+1 Processor Qty / Socket Type (2) AMD Socket SP3 Supported CPU Series (2) AMD EPYCTM 7002 Series Processors Configurable Thermal Design Power (cTDP) Wattage Max up to 240W Memory Supported DIMM Qty (16)+(16) DIMM slots DIMM Type / Speed DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 Capacity Up to 4,096GB RDIMM/LRDIMM Memory channel 8 Channels per CPU Memory voltage 1.2V Expansion Slots PCI-E (2) PCI-E Gen4 x16 slots (FH / 10.5"L) / (1) PCI-E Gen4 x8 slot (FH / HL) / (2) PCI-E Gen4 x16 (HH, HL) slots Pre-install TYAN Riser Card (PCI-E Gen4) (1) M8252T75-L24-1F riser card for (1) FH/10.5"L PCI-E Gen4 x16 slot (left) / (1) M8252T75-R24-2F riser card for (1) FH/10.5"L PCI-E Gen4 x16 + (1) FH/HL PCI-E Gen4 x8 slots (right) / (1) M8252T75-L16-1L riser card for (1) HH/HL PCI-E Gen4 x16 slot (left) / (1) M8252T75-R16-1L riser card for (1) HH/HL PCI-E Gen4 x16 slot (right) Others (1) PCI-E Gen4 x16 OCP 3.0 slot LAN Qty / Port (2) 10GbE ports, (1) GbE port dedicated for IPMI Controller Intel X550-AT2 PHY Realtek RTL8211E Storage SATA Connector (2) SFF-8654 connectors for up to (16) SATA ports Controller Direct from AMD EPYC CPU Speed 6Gb/s RAID N/A Additional SATA Connector (2) SATA Controller Marvell 9235 Speed 6Gb/s RAID N/A NVMe Connector (U.2) (4) SFF-8654 connectors for (8) front NVMe Connector (M.2) (2) 22110/2280 (by PCI-E Gen3 interface) Graphic Connector type D-Sub 15-pin Resolution Up to 1920x1200 Chipset Aspeed AST2500 I/O Ports USB (2) USB3.1 Gen1 ports (at front) / (2) USB3.1 Gen1 ports (at rear) COM (2) headers (COM1, COM2) VGA (1) D-Sub 15-pin port RJ-45 (2) 10GbE ports, (1) GbE dedicated for IPMI System Monitoring Chipset Aspeed AST2500 Temperature Monitors temperature for CPU and memory and system environment Voltagevv Monitors voltage for CPU, memory, chipset and power supply LED Over temperature warning indicator / Fan and PSU fail LED indicator Others Watchdog timer support Server Management Onboard Chipset Onboard Aspeed AST2500 AST2500 iKVM Feature 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub AST2500 IPMI Feature IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface BIOS Brand / ROM size AMI / 32MB Feature Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI sleeping states S0,S1,S5 / FAN speed control automatic / ACPI 6.0 Operating System OS supported list Please refer to our AVL support lists. Regulation FCC (DoC) Class A CE (DoC) Class A CB/LVD Yes C-Tick Class A VCCI Class A Operating Environment Operating Temp. 10oC to 35oC (50oF to 95oF) Non-operating Temp. - 40oC to 70oC (-40oF to 158oF) In/Non-operating Humidity 90%, non-condensing at 35oC RoHS RoHS 6/6 Compliant Yes Package Contains Barebone (1) TS75A-B8252 Barebone Manual (1) Quick Installation Guide