B8026T70AV16E8HR - Tyan System B8026T70AV16E8HR 2U AMD EPYC Max.2TB 16x2.5 Hot-Swap SATA/SAS Retail

System
Form Factor:2U Rackmount
Chassis Model:TN70A
Dimension (D x W x H):27.56" x 17.72" x 3.43" (700 x 450 x 87mm)
Motherboard:S8026GM2NRE
Gross Weight:30 kg (66 lbs)
Net weight:19 kg (42 lbs)
Front Panel
Buttons:(1) RST / (1) ID / (1) PWR w/ LED
LEDs:(1) ID / (1) Warning
I/O Ports:(2) USB 2.0 ports
External Drive Bay
Type / Qty:2.5" Hot-Swap SSD/HDD + NVMe / (16) + (8)
HDD backplane support:SAS 12Gb/s /SATA 6Gb/s / NVMe
Supported HDD Interface:(16) 2.5" SATA 6Gb/s + (8) 2.5" NVMe
Internal Drive Bay
Type / Qty:(2) 2.5" fixed HDD/SSD
Supported HDD Interface:(2) SATA 6Gb/s
System Cooling Configuration
FAN:(4) 6cm fans
Power Supply
Type:RPSU
Input Range:AC 100-127V/10A / AC 200-240V/5A
Frequency:50-60 Hz
Output Watts:770 Watts
Efficiency:80 plus Platinum
Redundancy:1+1
Processor
Socket Type / Qty:AMD Socket SP3/ (1)
Supported CPU Series:(1) AMD EPYC^TM 7000 Series Processor
Average CPU Power (ACP) wattage:Max up to 180W
Memory
Supported DIMM Qty:(16) DIMM slots
DIMM Type / Speed:DDR4 ECC RDIMM/LRDIMM/NVDIMM 2667
Capacity:Up to 1,024GB RDIMM/LRDIMM
Memory channel:8 Channels
Memory voltage:1.2V
Expansion Slots
PCI-E:(2) PCI-E Gen3 x8 slots / (2) PCI-E Gen3 x8 slots ( w/ x0 link or x8 link) / (2) PCI-E Gen3 x16 slot ( w/ x16 link or x8 link) / Without using OCP 2.0 Mezz card, please contact with Tyan technical support for details.
Pre-install TYAN Riser Card:M7106-L24-3F / M7106-R24-3F
Others:(1) PCI-E Gen3 x16 OCP 2.0 slots (conn.A+conn.B)
LAN
Port Qty:(2) GbE ports, (1) PHY dedicated for IPMI
Controller:Broadcom BCM5720
PHY:Realtek RTL8211E
Storage
SATA:Connector:(2) SFF-8612 for (16) SATA ports
Controller:Direct from AMD CPU
Speed:6.0 Gb/s
RAID:N/A
NVMe:Connector (M.2):(2) 22110/2280/2260/2242 (by PCI-E and SATA interface)
Connector (OCuLink):(4) SFF-8612 for (8) NVMe ports
Graphic
Connector type:D-Sub 15-pin
Resolution:Up to 1920x1200
Chipset:Aspeed AST2500
I/O Ports
USB:(3) USB3.0 ports (2 at rear, 1 TYPE-A)/ (2) USB2.0 ports (2 at front)
COM:(1) DB-9 port (COM1) + (1) header (COM2)
VGA:(1) D-Sub 15-pin port
RJ-45:(2) GbE ports, (1) GbE dedicated for IPMI
System Monitoring
Chipset:Aspeed AST2500
Temperature:Monitors temperature for CPU and memory and system environment
Voltage:Monitors voltage for CPU, memory, chipset and power supply
LED:Over temperature warning indicator / Fan and PSU fail LED indicator
Others:Watchdog timer support
Server Management
Onboard Chipset:Onboard Aspeed AST2500
AST2500 iKVM Feature:IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Feature:24-bit high quality video compression / 10/100/1000 Mb/s MAC interface
BIOS
Brand / ROM size:AMI / 32MB
Feature:Hardware Monitor / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI 6.1 / SMBIOS 3.1/PnP/Wake on LAN / ACPI sleeping states S5
Operating System
OS supported list:Please refer to our AVL support lists.
Regulation
FCC (DoC):Class A
CE (DoC):Class A
VCCI:Class A
CB/LVD:Yes
RCM:Class A
Operating Environment
Operating Temp.:10^o C - 35^o C (50^o F- 95^o F)
Non-operating Temp.:- 40^o C - 70^o C (-40^o F - 158^o F)
In/Non-operating Humidity90%, non-condensing at 35^o C
RoHS
RoHS 6/6 CompliantYes