B75C-12-L-0 - Airmar B75C-12-L 12d Tilt Low CHIRP Bare Wire Cable

Airmar B75C-12-L 12d Tilt Low CHIRP with Bare Wire Mix-N-Match Cable

• Depth & fast-response water-temperature sensor
• Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth
• 300 W of power with a maximum depth of 353 m (1200')
• Great deep-water performance
• Low-profile, thru-hull housing provides good display resolution at speed when installed properly
• Recommended for stepped, planing, or displacement hull
• Bronze housing for use in a fiberglass or wood hull

Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low-frequency band, operating between 40 and 75 kHz, is a deep-water performer, providing excellent coverage and tracking. The B75L transducer delivers up to 35 kHz of total bandwidth in just one installation.

When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

Provides greater depth range, wider beamwidth, and ultimately more coverage under the boat

Chirp signal processing technology used with AIRMAR broadband, Chirp-ready transducers provides more detail at greater depths and is less susceptible to noise

Great for operating at high boat speeds

• B75C-12-L-MM
• MMC-0 Cable

The Airmar B75C-12-L 12d Tilt Low CHIRP transducer is designed for marine applications, providing depth and water temperature sensing. This thru-hull unit, part number B75C-12-L-0, operates within a low-frequency CHIRP band of 40 kHz to 75 kHz, offering a beamwidth that varies from 32� to 21�. With a 300 W power rating, it can achieve a maximum depth of 366 meters (1200 feet). The bronze housing is suitable for installation in fiberglass or wood hulls, and its 12-degree tilted element corrects for hull deadrise between 8 and 16 degrees, ensuring the beam is directed vertically for accurate readings. This transducer is recommended for smaller boats, including center consoles, with stepped, planing, or displacement hulls, where deep-water performance and detailed bottom coverage are required.