B7108T200X4-220PE6HR - Tyan System B7108T200X4-220PE6HR 2U RM Dual Socket Xeon 6x2.5 Hot-Swap per blade HDD Retail

System
Form Factor:2U Rackmount
Chassis Model:TN200
Dimension (D x W x H):33.43" x 17.47" x 3.42" (849 x 443.8 x 86.8mm)
Motherboard Name:(4) S7108GMR (4 blades in one chassis)
Gross Weight:38 kg (84 lbs)
Net weight:30 kg (66.5 lbs)
Board Dimension:6.79" x 20.26" (172.4 x 514.7mm)
Blade Dimension (D x W x H):20.66" x 7.06" x 1.6" (524.8 x 179.3 x 40.7mm)
Feature:Four blades in one chassis
Front Panel
Buttons:(4) ID w/ LED / (4) PWR w/ LED
I/O Ports:(4) Display ports (2 x USB2.0 + 1 x D-SUB VGA ports w/ via cable, per port )
External Drive Bay (per blade)
Type / Qty:2.5" Hot-Swap / (6) / Total (24) devices
HDD backplane support:(24) SATA 6Gb/s, NVMe
Supported HDD Interface:NVMe
System Cooling Configuration (per blade)
FAN:(4) 8cm fans
Processor (per blade)
Qty / Socket Type:(2) LGA3647
Supported CPU Series:Intel Xeon Processor Scalable Families
Thermal Design Power (TDP) wattage:Max up to 165W
System Bus:Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support
Notification:165W CPUs are supported with certain system configurations. Please contact Tyan Technical Support for additional information.
Chipset (per blade)
PCH:Intel C621
Memory (per blade)
Supported DIMM Qty:(8)+(8) DIMM slots
DIMM Type / Speed:Up to 512GB RDIMM/ 1,024GB LRDIMM/ 2,048GB LRDIMM 3DS Follow latest Intel DDR4 Memory POR
Memory channel:6 Channels per CPU
Memory voltage:1.2V
Expansion Slots (per blade)
PCI-E:(1) PCI-E Gen3 x16 slot (Half-height, Half-length) / (1) PCI-E Gen3 x8 slot (Half-height, Half-length) / (1) PCI-E Gen3 x16 OCP 2.0 slot (conn.A+conn.B+conn.C)
Pre-install TYAN Riser Card:(1) M7108T200-L16-1L riser card for (1) PCI-E Gen3 x16 slot / (1) M7108T200-R8-1L riser card for (1) PCI-E Gen3 x8 slot
LAN (per blade)
Qty / Port:(1) PHY
PHY:Realtek RTL8211E
Storage (per blade)
sSATA:Connector:(2) 8-pin SATA DOM
Controller:Intel C621
Speed:6.0 Gb/s
RAID:RAID 0/1/10/5 (Intel RSTe)
M.2 connector:(2) M.2 connector (22110/2280) by PCI-E interface
Graphic (per blade)
Connector type:D-Sub 15-pin
Resolution:Up to 1920x1200
Chipset:Aspeed AST2500
I/O ports (per blade)
USB:(2) USB3.0 (at rear)
COM:(1) DB-9 COM port
VGA:(4) Display ports (2 x USB2.0 + 1 x D-SUB VGA ports w/ via cable, per port, at front )
RJ-45:(1) GbE port dedicated for IPMI
TPM (per blade)
TPM Support:Please refer to our TPM supported list.
System Monitoring (per blade)
Chipset:Onboard Aspeed AST2500
Temperature:Monitors temperature for CPU and memory and system environment
Voltage:Monitors voltage for CPU, memory, chipset and power supply
LED:Over temperature warning indicator, Fan and PSU fail LED indicator
Others:Watchdog timer support
Server Management (per blade)
AST2500 IPMI Feature:24-bit high quality video compression, 10/100/1000 Mb/s MAC interface
AST2500 iKVM Feature:IPMI 2.0 compliant baseboard management controller (BMC), Supports storage over IP and remote platform-flash, USB 2.0 virtual hub
Onboard Chipset:Onboard Aspeed AST2500
BIOS (per blade)
Brand / ROM size:AMI / 32MB
Feature:Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1
Power Supply
Type:RPSU
Input Range:AC 200-240V/13A
Output Watts:2,200 Watts
Efficiency:PFC / 80 plus Platinum
Redundancy:1+1
Operating System
OS supported list:Please refer to our AVL support lists.
Regulation
FCC (DoC):Class A
CE (DoC):Class A
CB/LVD:Yes
RCM:Class A
VCCI:Class A
Operating Environment
Operating Temp.:10^o C to 35^o C (50^o Fto 95^o F)
Non-operating Temp.:- 40^o C to 70^o C (-40^o F to 158^o F)
In/Non-operating Humidity:90%, non-condensing at 35^o C