Technical Specifications
External SAS Ports
12 External SAS Port Type
3 x SFF-8644 Internal SAS Ports
24 Internal SAS Port Type
6 x SFF-8643 Box Controller Modules
Expander Board: 1 modules
Sensors: 1 sensor on expander board Controller External Connectors
1 x SAS IN connector for connection to the host
2/3 x SAS OUT connector for expasion to next JBOD enclosure Drives
SAS Hot-Plug Hard Drives
Up to 24/32 12.0 Gb/s,6.0Gb/s or 3Gb/s SAS hard drives at speed of 10K or 15K rpm
SATA Hot-Plug Hard Drives
Up to 24/32 6.0 Gb/s or 3Gb/s SATA hard drives at speeds of 7.2K or 10K rpm Internal Connectors
6/8 SFF-8643 Min SAS HD connectors
1 x 6-pin PCI-E power connector
4 x 3-pin fan connector
2 x 2-pin power status connector
1 x 6-pin LCD connector
1 x 7-pin dual expander module heartbeat connector Serial Connector
1 x 6-pin UART RJ-11 connector(for expander box manager only)
1 x RJ-45 LAN connector (for manufacture manager only) LED Indicators
Internal fault/activity header
24/32 2.54mm activity and fault header External SAS Port LED Indicators
Two one-color LED status indicators for each SAS host port, one for SAS port link and one for the activity status
Two one-color LED status indicators for each SAS expansion port, one for SAS port link and one for the activity status Monitors/Indicators
LCD Control Panel for setup, alarm mute and configuration
System status indication through LCD, LED (link status and activity) and alarm buzzer
Enclosure management (protocols SES-2 over SAS ports) ready Management
In-band SAS port
Out-of-band RS232 serial port
CLI through RS232 serial port Weight
3.00
Item Dimension
2 x 1 x 4
Warranty Information
3 years
