29+Years
29+Years
18 Available
Condition: New
TOPAZ, ACCESSORY, ETHERNET ADAPTER, FOR USE WITH TOPAZ SERIAL, OR BHSB PADS, WITH SOFTWARE
This device can be plugged into the network at any point, for example, right next to the client machine. Once the converter is plugged into the network and the proper drivers installed to the server, a virtual com port is created right on the server, which can then simply be chosen as the COM port assignment during the SigPlus install on the server. This option really simply bypasses the client machine altogether, as the IP-mapped virtual com port simply exists on the server directly.
The TOPAZ ETHERNET 10/100 SERIAL PORT ADAPTER, part number A-ETH1-1, is designed for IT environments utilizing Topaz serial or BHSB signature pads. This accessory facilitates network connectivity for these devices, bypassing direct client machine connections. It addresses challenges in deploying serial-based signature pads within networked infrastructures by converting a serial signal to an Ethernet connection. The adapter plugs into a local network, and with appropriate driver installation on the server, creates a virtual COM port. This virtual port can then be selected during SigPlus installation on the server, allowing the signature pad to communicate directly with the server over the network. This setup simplifies deployment and management for businesses requiring centralized control over their signature capture solutions, particularly when client machines lack direct serial ports or a more distributed setup is preferred.
The serial-to-ethernet adapter is only for use with 9-PIN Topaz serial pads. This accessory allows for plug-in to a local network through a standard ethernet connection.
This serial-to-ethernet adapter is specifically designed for use with 9-PIN Topaz serial pads and BHSB pads. It enables these devices to connect to a local network.
The product includes the Ethernet adapter itself, along with necessary software for installation. It allows for connection to a local network via a standard Ethernet connection.
By creating a virtual COM port directly on the server, this adapter allows the signature pad to communicate over the network, bypassing the client machine. This simplifies installation and management, especially in environments where client machines may not have serial ports or a centralized setup is preferred.
This adapter supports connection to a local network through a standard 10/100 Ethernet connection. It allows the serial signature pad to integrate into an existing network infrastructure.
A-ETH1-1 - Topaz Systems TOPAZ ETHERNET 10/100 SERIAL PORT ADAPTER
