Barton Marine 98 078 Laser Cleat Base Assembly for Dinghies

Laser Cleat Base Assembly for Dinghies

This high-quality replica cleat mount is designed for Laser dinghies, featuring two mini K Cams and a new pillar fairlead design for optimal adjustment from all angles.

Contents Include:

• Cleat base with two fixing holes
• Two 70 100 K Cam mini cleats
• Two 70 105 K Cam pillar fairleads

Installation Instructions:

If using on very old laser models, you may utilize the existing fixing holes for the alloy clamcleat. If no holes are available, position the cleat base behind the mast along the centerline, measure 437mm back from the mast slot, and drill a 4mm pilot hole to accept a 5mm self-tapping screw (not included).

Loosely fit the screw, then align again along the centerline; mark and drill the second fixing hole. Remove the cleat base and seal the screw holes with sealant before final installation.

The distance to the first fixing hole center from the back of the mast slot is 437mm.

Note that Barton fittings are high-quality replacements that serve the same function as original parts. They are not official parts associated with the Laser® trademark and are not to be used during Association events. These are ideal for social sailing, sailing schools, club sailing, or training purposes. Laser® is a registered trademark owned by Velum Limited and licensed for use in Europe to Laser Performance (Europe) Limited.