Technical Specifications
Ports
Switch ports:
16 x QSFP28 ports. Each Port supports 1 x 40/100 GbE
8 line-card slots f
or QSFP28, DCO ACO modules
Management ports on port side:
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage
Key Componets
Switch Silicon:
Broadcom BCM56965 Tomahawk+
CPU Modules:
Intel Xeon D-1518 quad-core x86 Processor
DDR4: SO-DIMM 8 GB x 2
SPI Flash: 16MB
m.2 SSD: 32 GB MLC
Performance
Switching Capacity:
6.4 Tbps full duplex Jumbo frames support up to 9216 Bytes
Subject to NOS:
MAC Addresses: 8 K min./136 K max
VLAN IDs: 4 K
IPv4: 8 K min./84 K max. host entries 16 K LPM entries with TCAM-only mode
IPv6: 4 K min /36 K max. host Entries, IPv6/64 is equal to 8 K TCAM-only mode
Physical and Environmental
Operating Temperature:
0oC to 45oC (32oF to 113oF)
Storage Temperature:
-40oC to 70oC (-40oF to 158oF)
Operating Humidity:
5% to 95% (non-condensing)
Software
Switch is loaded with Open Network Install Environment (ONIE) software installer
LEDs
QSFP28 Port LEDs: Link Status, Activity, Speed
Ethernet Management Port LED: Link Status, Activity
System LEDs: Diagnostic, Locator, PSU and Fan Status
Modules LED: Link Status, Activity, Speed
Power
PSUs: 2 redundant, load-sharing, hot-swappable AC or 48 VDC
Input Voltage: 90 to 240 VAC at 50-60 Hz. 36 to 72 VDC.
PSU Efficiency: Up to 93% for AC PSUs
Regulatory
EMI
CE Mark
EN55032 Class A
EN55024
EN61000-3-2
EN61000-3-3
FCC Part 15 Subpart B Class A
VCCI Class A
Safety
CB
UL/CUL
Environmental:
Temperature: IEC 68-2-14
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: ISTA 2A
RoHS 2.0 Compliant
Item Dimension (L"xW"xH")
18 x 22 x 3
Weight
25.57 LB
Warranty Information
3 years
