48XSFP28 PLUS 6XQSFP28 TOMAHAWK-BASED SWITCH WITH INTEL ATOM C2538 CPU MODULE WI
Technical Specifications
Ports Switch Ports: 48 x 25G SFP28 plus 6 x 100G QSFP28 ports: Each SFP28 supports 1 x 10 G or 25 GbE Each QSFP28 supports 1x40/100 GbE or 4 x 25 GbE or 4 x 10 GbE per port using splitter cables Management ports on port side: 1 x RJ-45 serial console 1 x RJ-45 100/1000BASE-T management 1 x USB Type A storage Key Componets Switch Silicon: Broadcom BCM56967 Tomahawk+ No PHYs, No Retimers CPU Modules: DDR3: 8 GB x 2 SO-DIMM with ECC SPI NOR Flash: 8 MB x 2 mSATA: 32 GB MLC Performance Switching Capacity: 3.6 Tbps full duplex Forwarding Rate: 2.6 Bpps Jumbo frames support up to 9216 Bytes Packet Buffer Size: 22 MB integrated packet buffer Subject to NOS: MAC Addresses: 8K min./136K max. VLAN IDs: 4 K IPv4/32: 16 K L3 LPM entries with TCAM-only mode IPv6/64: 8 K L3 LPM entries with TCAM-only mode IPv6/128: 4 K L3 LPM entries with TCAM-only mode Software Diagnostics Compatible with the following NOS options: Open Network Linux, the open-source, OCP reference NOS Compatible with Cumulus Linux r3.6 and later version Compatible with PicOS from Pica8 Inc LEDs 10G SFP+ Port LEDs: Link Speed, Link Status, Activity 25G SFP28 Port LEDs: Link Status, Activity for 25G status 100G QSFP28 Port LEDs: Link Status, Activity for 100G status 100G QSFP28 Breakout LEDs: show Link, Status, Activity with 4 x 25G breakout Ethernet Management Port LED: Link Status, Activity System LEDs: Diagnostic, Locator, PSU and Fan Status Power PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC Input Voltage: 90 to 240 VAC at 50-60 Hz. -36 to -72 VDC PSU Efficiency: Up to 93% for AC PSUs Power input option: 12 VDC The total estimated power budget is around 511 W Item Dimension (L inchxW inchxH inch) 18 x 19 x 2 Weight 20.78lb Warranty Information 3 Year