Kramer 20-004290 4x2 4K60 USBC/HDMI Matrix Transmitter, AV and USB 3.0 coupled signals switching, Built in full USBC doc

INPUTS 2 HDMI: On female HDMI connectors 2 USB-C: On USB-C female connectors 1 Mic/Unbalanced Stereo Audio: On a 3-pin terminal block connector 1 AUX Unbalanced Stereo Audio: On a 3.5mm mini jack OUTPUTS 1 HDMI: On a female HDMI connector 1 HDBaseT: On an RJ-45 connector 1 Balanced Stereo Audio: On a 5-pin terminal block connector Ports 1 Ethernet: On an RJ-45 connector 1 Control RS-232: On a 3 pin terminal block connector 1 Data RS-232: On a 3 pin terminal block connector 1 Program USB: On a USB type A connector for firmware upgrade 3 USB (HUB): On USB type A connectors 2 USB (Host): On USB type B connectors Integrated USB Hubs: 2 Video Max Data Rate USB-C and HDMI ports: 18Gbps HDBT port: 10.2Gbps HDMI Support: 4K60 CEC xvYCC color Content Protection: HDCP 1.4 and 2.2 USB Features Data Rate: USB 3.0 Ports: 5Gbps USB 2.0 over HDBT: Up to 127Mbps (out of max 480Mbps Extension Line Up to 40m (130ft): At 4K@60Hz (4:2:0) Up to 70m (230ft) At full HD (1080p@60Hz) Compliance: HDBaseT 2.0 Extended RS-232 Baud Rate 300 to 115200 Analog Audio Input Coupling: AC Output Coupling: DC Max Input Signal Level: 5.5Vp-p/8dBu Max Output Signal Level: 6Vp-p/8.7dBu Frequency Response: 20Hz to 20kHz 0.1dB THD+N (A-weighted): 76dB Input Impedance: 14Kr Output Impedance: 500r For Embedded Audio Number of Supported Channels: Up to 8CH Supported Audio Formats: Dolby DTS Power Source: 24V DC 5A Consumption 24V DC 4.9A