29+Years
29+Years
9 Available
Condition: New
Marine Fabric Guard - 32oz *Case of 6*
303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains.
Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more. When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels.
Keep all your favorite fabrics crisp and clean for years to come.
Features:
*Sold as a Case Pack
WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
The 303 Marine Fabric Guard (part number 30604CASE) is a fabric protector designed to restore and enhance water and stain repellency for various marine and outdoor fabrics. This product is supplied as a case of six 32oz units, each with a trigger sprayer, suitable for businesses requiring bulk quantities for maintenance or service operations. It is formulated to create a protective shield against both water-based and oil-based stains, while also restoring lost water repellency to factory levels on clean, dry fabrics. The solution is safe for use on both synthetic and natural fibers commonly found in marine environments, such as outdoor leather seats, boat covers, awnings, and Dacron sails. It does not alter the fabric's color, feel, flammability, or breathability. This product addresses the need for maintaining fabric integrity and appearance in outdoor and marine settings, extending the life of treated materials by protecting them from environmental exposure and common staining agents.
Marine Fabric Guard with Trigger Sprayer - 32oz *Case of 6*
303 Fabric Guard is the only product recommended by and for Sunbrella, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.
USAGE DIRECTIONS:
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
NOTE:Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.
CURING:12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
COVERAGE:40-75 sq. ft. (30 x 60cm) depending on material and application method.
EXAMPLE USE CASES:
BOAT CUSHION
UMBRELLA
Features:
30604CASE - 303 Cleaner 303 Marine Fabric Guard - 32oz *Case of 6*
