29+Years
29+Years
29 Available
Condition: New
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
The Rule 500GPH Standard Bilge Pump is a 12V submersible pump designed for marine and vessel applications. This unit is suitable for IT buyers and businesses requiring reliable water removal from bilges. The pump operates at a flow rate of 500 gallons per hour (GPH) at 12V, aligning with typical onboard voltage supplies. It features an improved design that includes a hidden air vent to prevent airlocking, ensuring consistent operation. The pump is non-automatic and requires connection to a panel switch or a Rule float switch for activation. Key features include a high-efficiency, low-amp motor, a stainless-steel shaft, and a built-in thermal cell for protection against overheating. Electromagnetic suppression (EMC) is integrated to prevent interference. The 25DA pump is ignition protected, making it suitable for environments where flammable vapors may be present, and includes a backflow preventer.
The Rule 500GPH Standard Bilge Pump operates on a 12V power supply. It is designed to achieve its rated flow at this voltage, which is typical for onboard vessel systems.
No, this bilge pump is non-automatic. It requires connection to a panel switch or a Rule float switch for manual or triggered operation.
The pump includes a hidden air vent designed to prevent airlocking, ensuring continuous operation. It also has a built-in thermal cell for protection against overheating and a backflow preventer.
This bilge pump has a flow rate of 500 gallons per hour (GPH). This flow is achieved at 12V, which is a common onboard voltage supply.
25DA - Rule 500GPH Standard Bilge Pump - 12V
