Nzxt CA-H500W-B1 Cs Ca-h500w-b1 H500i M-tower Lightingfan 2xusb3.1 Gen1 Mitx Matx Atx Bk

Material(s)
SECC Steel and Tempered Glass Motherboard Support
Mini-ITX, MicroATX, and ATX I/O Ports
2 x USB 3.1 Gen 1
1 x Audio/Mic Filters
Front right side panel, bottom front and PSU intake Expansion Slots
7 Smart Device
3 x Fan channels with Max 10W per channel output-
1 x RGB LED port support up to 4 x HUE+ LED strips or 5 x Aer RGB fans
Built-in noise detection module
Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters. System Requirements
PC with open internal USB 2.0 port and Windows 10 operating system recommended. Internet connection is needed to download CAM.
Some CAM features require Internet access, a valid email address and acceptance of our current Terms of Service. Vertical GPU Mount
Support 2 slot GPUs
Riser card with 30cm length recommended. Riser card not included. Drive Bays
2.5: 2+1
3.5: 2+1 Radiator Support
Front: Up to 280mm
Rear: 120mm Fan Support
Front: 2 x 120/2 x 140mm
Top: 1 x 120mm (1 Aer F120 Case Version included) / 1 x 140mm
Rear: 1 x 120mm (1 Aer F120 Case Version included) Fan Specs
Aer F120 (Case Version)
Speed: 1200 + 200 RPM
Airflow: 50.42
CFM Noise: 28 dBA
Bearing: Rifle Bearing Clearance
Cable Management: 19-23mm
GPU Clearance: Up to 381mm
CPU Cooler: Up to 165mm
Front Radiator: 60mm
Rear Radiator: 60mm
Reservoir and Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel) Item Dimension ( L inch x W inch x H inch)
11 x 20 x 21
Weight
34.00lb
Warranty Information
2 Years