Tyan B8026T70EV10E4HR Sy 2u Amd Epyc7000 Epyc7000 Max1024g Ddr4 12x3.5hs Rtl

System
Form Factor
2U Rackmount
Chassis Model
TN70E
Motherboard Name
S8026GM2NRE System
Form Factor
2U Rackmount
Chassis Model
TN70E
Motherboard Name
S8026GM2NRE External Drive Bay
Qty / Type
(8) 3.5"/2.5" Hot-Swap SSD/HDD (at front) + (4) NVMe (at front) + (2) 2.5" Hot-Swap SSD/HDD (at rear)
HDD Backplane Support
SAS 12Gb/s /SATA 6Gb/s /NVMe
Supported HDD Interface
(8) SATA 6Gb/s + (4) SATA/NVMe (at front) + (2) SATA 6Gb/s (at rear)
Notification
The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. System Cooling Configuration
FAN
(8) 6cm fans Power Supply
Type
RPSU
Input Range
AC 100-127V/10A / AC 200-240V/5A
Frequency
50-60 Hz
Output Watts
770 Watts
Efficiency
80 plus Platinum
Redundancy
1+1 Processor
Qty / Socket Type
(1) AMD Socket SP3
Supported CPU Series
(1) AMD EPYC 7001/7002 Series Processor
Thermal Design Power (TDP) Wattage
Max up to 180W Memory
Supported DIMM Qty
(16) DIMM slots
DIMM Type / Speed
DDR4 ECC RDIMM/LRDIMM 2666/2400
Capacity
Up to 1,024GB RDIMM/LRDIMM
Memory channel
8 Channels per CPU
Memory voltage
1.2V
Notification
LRDIMM is not supported when AMD EPYC 7002 Series Processors deployed in all configurations. Please contact Tyan Technical Support for more details. Expansion Slots
PCI-E
(4) PCI-E Gen3 x8 slots (FH / HL) / (2) PCI-E Gen3 x8 slots (HH / HL w/ tall bracket)
Pre-install TYAN Riser Card (PCI-E Gen3)
(1) M7106-L24-3F riser card for (2) FH/HL PCI-E Gen3 x8 + (1) HH/HL PCI-E Gen3 x8 slots (left) / (1) M7106-R24-3F riser card for (2) FH/HL PCI-E Gen3 x8 + (1) HH/HL PCI-E Gen3 x8 slots (right)
Others
(1) PCI-E Gen3 x16 OCP 2.0 slot (conn.A+conn.B) /
The PCI-E x8 signal routed to conn.B is muxd with the bottom slot on M7106-R24-3F riser. LAN
Qty / Port
(2) GbE ports, (1) GbE dedicated for IPMI
Controller
Broadcom BCM5720
PHY
Realtek RTL8211E Storage
SATA
Connector
(2) SFF-8612 for (16) SATA ports
Controller
Direct from AMD EPYC CPU
Speed
6Gb/s
RAID
N/A
Notification
The rear 2 SATA SSDs/HDDs are not available when AMD EPYC 7002 Series Processors deployed in all configurations. Please contact Tyan Technical Support for more details.
NVMe
Connector (OCuLink)
(2) SFF-8612 for (4) NVMe ports
Connector (M.2)
(2) 22110/2280/2260/2242 (by PCI-E and SATA interface)
Notification
2 onboard M.2 connectors shall support NVMe only when AMD EPYC 7002 Series Processors deployed in all configurations. Please contact Tyan Technical Support for more details. Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2500 I/O Ports
USB
(3) USB3.0 ports (2 at rear, 1 TYPE-A) / (2) USB2.0 ports (2 at front)
COM
(1) DB-9 port (COM1) + (1) header (COM2)
VGA
(1) D-Sub 15-pin port
RJ-45
(2) GbE ports, (1) dedicated GbE for IPMI TPM (Optional)
TPM Support
Please refer to our TPM supported list. System Monitoring
Chipset
Aspeed AST2500
Temperature
Monitors temperature for CPU and memory and system environment
Voltage
Monitors voltage for CPU, memory, chipset and power supply
LED
Over temperature warning indicator / Fan and PSU fail LED indicator
Others
Watchdog timer support Server Management
Onboard Chipset
Onboard Aspeed AST2500
AST2500 iKVM Feature
24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Feature
IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface BIOS
Brand / ROM size
AMI / 32MB
Feature
Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI 6.1 / ACPI sleeping states S0,S1,S5 / FAN speed control automatic Operating System
OS supported list
Please refer to our AVL support lists. Regulation
FCC (DoC)
Class A
CE (DoC)
Class A
CB/LVD
Yes
RCM
Class A
VCCI
Class A Operating Environment
Operating Temp.
10^o C - 35^o C (50^o F- 95^o F)
Non-operating Temp.
- 40^o C - 70^o C (-40^o F - 158^o F)
In/Non-operating Humidity
90%, non-condensing at 35^o C RoHS
RoHS 6/6 Compliant
Yes