Adaptec 2170500-R 1420 Serial Ata Raid Rohs

1420 SERIAL ATA RAID ROHS
Serial ATA II, the successor technology to SATA for data storage, is a point-to-point connection that delivers full throughput to each storage device by allowing multiple ports to be managed by a single controller. The Adaptec Serial ATA II RAID 1420SA card is a four-port controller featuring Adaptec HostRAID - an integrated RAID technology that maximizes system performance and uptime. The Adaptec 1420SA supports up to four 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, 10, and JBOD (individual drive). The Adaptec 48-bit logical block addressing (LBA) support enables use of disk drives exceeding 137 GB in capacity.
Product Description Adaptec Serial ATA II RAID 1420SA - storage controller (RAID) - SATA-300 - PCI-X
Device Type Storage controller (RAID) - plug-in card - low profile
Interface Type PCI-X / 133 MHz
Dimensions (WxDxH) 6.6 in x 2.5 in
Controller Interface Type Serial ATA-300
Data Transfer Rate 300 MBps
Supported Devices Hard drive, disk array (RAID)
Channel Qty 4
Max Storage Devices Qty 4
RAID Level RAID 0, RAID 1, RAID 10, JBOD
Vista Certification Works with Windows Vista
General
Device Type Storage controller (RAID) - plug-in card - low profile
Interface Type PCI-X / 133 MHz
Depth 6.6 in
Height 2.5 in
Storage Controller
Controller Interface Type Serial ATA-300
Data Transfer Rate 300 MBps
Supported Devices Hard drive, disk array (RAID)
Channel Qty 4
Max Storage Devices Qty 4
RAID Level RAID 0, RAID 1, RAID 10, JBOD
Expansion / Connectivity
Interfaces 4 x storage - 7 pin Serial ATA ( internal )
Compatible Slots 1 x PCI-X / 133 MHz - low-profile
Miscellaneous
Works with Windows Vista Software and devices that carry the Works with Windows Vista logo have been tested for baseline compatibility with PC's running.
Compliant Standards RoHS
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 131 °F
TBDIU