Tripp G67471 Ups Smart Online 1000va 800w Rackmount 100v-120v Usb Db9 2urm - 1000va-800w - 4.5 Minute Full Load - 6 X Nema 5-15r

System overview - Online, double conversion 2U rack/tower UPS Voltage compatibility - 120V AC (100/110/120V) Frequency compatibility - 50/60 Hz compatible (auto-sensing) Output volt amp capacity (VA) - 1000 Output watt capacity (watts) - 800 , Output nominal voltage - 120V AC (100/110/120V) Maintains full-time sine wave output within 2 of selected nominal, less than 3 percent total harmonic distortion (linear load) / 6 percent total harmonic distortion (computer load) Output frequency regulation - Regulates line frequency to 50/60Hz above or below 0.5Hz Outlet quantity / type - 6 NEMA 5-15R 2 controllable load banks support automated load shedding and remote reboot on demand of locked network devices. Overload protection - 15A input breaker Maximum input amps - 8.6A , Input connection type - NEMA 5-15P , Input cord length - 6 ft. 14 gauge , Recommended electrical service - 15A 120V BATTERY - Full load runtime---6 minutes with internal batteries (800 watts) , Half load runtime---18 minutes with internal batteries (400 watts) , Expandable battery runtime - Supports extended runtime with optional external battery pack BP24V28-2U (limit 1) and BP24V70-3U (multi-pack compatible) DC system voltage - 24VDC , Typical battery lifespan - 3-6 years, depending on usage , Battery recharge rate - Less than 6 hours to 80 percent , Replacement Battery Cartridge - RBC92-2U Voltage regulation description - On-line, double-conversion power conditioning maintains output within 2 of 100/110/120 volts at all times Overvoltage correction - Maintains output of selected nominal /-2 during overvoltages to 138V AC Brownout correction - Maintains output of selected nominal above or below 2 percent during undervoltages to 65V AC (at loads greater than 70 percent undervoltage correction extends to 80V) Front panel LEDs - LED STATUS DISPLAY line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100 percent , 75 percent , 50 percent , 25 percent) Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds