Supermicro SYS-2028TP-DC1TR(3YR) SuperServer 2028TP-DC1TR Server Barebone System - 2U Rack-mountable - Socket LGA 2011-v

Motherboard (Two per System)
Super X10DRT-PT Processor/Cache (per Node)
CPU:
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache: Up to 22 Cores / Up to 55MB Cache
System Bus: QPI up to 9.6 GT/s
Note: BIOS version 2.0 or above is required
Note: Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. System Memory (per Node)
Memory Capacity:
16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4
SDRAM 72-bit
DIMM Sizes:
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors On-Board Devices (per Node)
Chipset: Intel C612 chipset
SAS:
Broadcom 3108 SAS3 (12Gbps) controller RAID 0, 1, 5, 6, 10, 50, 60 support
Optional SuperCap
IPMI:
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers:
Intel X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics: ASPEED AST2400 BMC Input / Output (per Node)
SAS: 8 SAS3 (12Gbps) ports
LAN:
2 RJ45 10GBase-T ports
1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
VGA: 1 VGA port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header (internal)
Others:
1 mSATA (full size) and CacheVault support on the daughter card
1 SATADOM support on the motherboard Chassis
Form Factor: 2U Rackmount
Model: CSE-217HD+-R1K28B
Available Colors: Black Front Panel
Buttons:
Power On/Off button
UID button
LEDs:
Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED Expansion Slots (per Node)
PCI-Express:
1x PCI-E 3.0 x16 Low-profile slot
1x PCI-E 3.0 x8 slot
1x PCI-E 3.0 x16 for GPU/Xeon Phi support (w/ GPU kit)
(Both CPUs need to be installed for full access to PCI-E slots) Drive Bays (per Node)
Hot-swap: 12x 2.5" Hot-swap SAS (8) / SATA (4) HDD Bays System Cooling
Fans: 4x 8cm heavy duty PWM fans with optimal fan speed control Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input:
1000W Output at 100-140V, 8-12A, 50-60Hz
1280W Output at 180-240V, 6-8A, 50-60Hz
DC Output:
1000W: +12V/83A +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification:
Platinum Level Certified95%+
Platinum Certified System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI Operating Environment / Compliance
RoHS: RoHS Compliant
Environmental Spec.:
Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature: -40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) Item Dimension (L"xW"xH")
34 x 23 x 14

Weight
85 lbs

Warranty Information
3 Years