Tyan B5630G62FV2E8HR System Thunder Sx 1u Xeon C621 Lga3647 Ddr4 Sata Retail

System
Form Factor: 1U Rackmount
Chassis Model: GT62F
Motherboard Name: S5630GMRE
Front Panel
Buttons: (1) PWR / (1) RST / (1) ID
LEDs: (1) PWR / (1) HDD / (2) LAN / (1) BMC event
I/O Ports: (2) USB 3.0 ports
External Drive Bay
Qty / Type: (2) 2.5" Hot-Swap SSD/HDD + (8) NVMe
HDD Backplane Support: SAS 12Gb/s /SATA 6Gb/s / NVMe
Supported HDD Interface: (2) SATA 6Gb/s + (8) NVMe
System Cooling Configuration
FAN: (5) 4cm fans
Power Supply
Type: RPSU
Input Range: AC 100-240V/8A
Frequency: 50-60 Hz
Output Watts: 650 Watts
Efficiency: PFC / 80 plus Platinum
Redundancy: 1+1
Serviceability: Hot-swap
Processor
Qty / Socket Type: (1) LGA3647
Supported CPU Series: Intel Xeon Scalable Processor
Thermal Design Power (TDP) Wattage: Max up to 205W
System Bus: 1066/ 800/ 533 MHz
Chipset
PCH: Intel C621
Memory
Supported DIMM Qty: (12) DIMM slots
DIMM Type / Speed: DDR4 RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 2666
Capacity: Up to 384GB RDIMM/ 768GB LRDIMM/ 1,536GB RDIMM 3DS/LRDIMM 3DS Follow latest Intel DDR4 Memory POR
Memory channel: 6 Channels
Memory voltage: 1.2V
Expansion Slots
PCI-E: (1) PCI-E Gen3 x8 OCP 2.0 slot (conn.A+conn.B+conn.C)
Pre-install TYAN Riser Card: (1) M2091 riser card (left) for (1) PCI-E Gen3 x16 slot
LAN
Qty / Port: (1) PHY
PHY: Realtek RTL8211E
Storage
- sSATA:
Connector: (2) SATA-DOM
Controller: Intel C621
Speed: 6.0 Gb/s
RAID: RAID 0/1/10/5 (Intel RSTe)
- NVMe:
Connector (OCuLink): (2) SFF-8612 for (4) NVMe ports via Tyan M2093 PCI-E Gen3 x16 Card / (2) SFF-8612 for (4) NVMe ports
Graphic
Connector type: D-Sub 15-pin
Resolution: Up to 1920x1200
Chipset: Aspeed AST2500
I/O Ports
USB: (2) USB3.0 ports (at rear) / (2) USB3.0 ports (at front) / (1) USB3.0 TYPE-A
COM: (1) DB-9 port (COM1) + (1) header (COM2)
VGA: (1) D-Sub 15-pin port
RJ-45: (1) GbE port dedicated for IPMI
System Monitoring
Chipset: Aspeed AST2500
Temperature: Monitors temperature for CPU and memory and system environment
Voltage: Monitors voltage for CPU, memory, chipset and power supply
LED: Over temperature warning indicator / Fan and PSU fail LED indicator
Others: Watchdog timer support
Server Management
Onboard Chipset: Onboard Aspeed AST2500
AST2500 iKVM Feature: 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Feature: IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface
BIOS
Brand / ROM size: AMI / 32MB
Feature: Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1
Regulation
FCC (DoC): Class A
CE (DoC): Class A
RCM: Class A
VCCI: Class A
Operating Environment
Operating Temp.: 10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temp.: - 40^oC to 70^oC (-40^oF to 158^oF)
In/Non-operating Humidity: 90%, non-condensing at 35^oC
RoHS
RoHS 6/6 Compliant: Yes
Package Contains
Barebone: (1) GT62F-B5630 Barebone
Manual: (1) Quick Installation Guide
Installation CD: (1) TYAN Device Driver CD