Startech PEXM2SAT3422 Controller Card 2xm.2 Ngff Ssd Raid Controller Card With 2xsata3 Ports Retail

SKU: BVK8KZLNP4 |  Mfg. Part: PEXM2SAT3422  | UPC: 065030863766

Share

In Stock (5)

Special Price $87.36 Regular Price $117.94

Condition: New
STARTECH

Free Shipping STARTECH

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports - Serial ATA/600 - PCI Express 2.0 x4 - Plug-in Card - RAID Supported - 0, 1, 10, 1+0, JBOD RAID Level - 2 Total SATA. (Refurbished)Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express. This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next


Hardware
Bus Type : PCI Express
Card Type : Standard Profile (LP bracket incl.)
Chipset ID : Marvell - 88SE9230
Industry Standards :
Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
PCI Express 2.0
Hardware RAID 0, RAID 1, RAID 10
Interface :
M.2 SATA (NGFF)
SATA
Port Style : Integrated on Card
Ports : 2 Performance
Number of Drives Supported Through Port Multiplier : 1 to 4
Number of Ports That Support Port Multiplier : 2 (can only use 1 PM at a time)
Port Multiplier : Yes
RAID : Yes
Supported RAID Modes :
JBOD - (Just a Bunch of Disks)
RAID 1 (Mirrored Disks)
RAID 0 (Striped Disks)
RAID 10 (1+0 Striped set of Mirrored Subset)
Type and Rate : SATA III (6 Gbps) Connector(s)
Connector Type(s) : 1 - PCI Express x4 Male
Internal Ports :
2 - M.2 (NGFF B-Key) Receptacle
2 - SATA (7 pin Data) Plug
1 - SP4 (4 pin Small Drive Power) Male Software
OS Compatibility :
Windows 10 (32-bit or 64-bit), 8 / 8.1 (32-bit or 64-bit), 7 (32-bit or 64-bit)
Windows Server 2012, 2008 R2
Mac OS 10.8 and later (tested up to 10.11)
Linux 3.5 Special Notes / Requirements
Note : The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
The cards two SATA ports support port multiplier, up to seven drives total (including two M.2 drives). Only one SATA port can use port multiplier at a time, with up to four drives total connected through PM (in a non-RAID configuration)
System and Cable Requirements : PCI Express x4 slot (backward compatible with x8, and x16 slots) LED Indicators
2 - M.2 drive LEDs (Green)
3 - Pin headers for LEDs Environmental
Humidity : 20 percent to 80 percent RH (Non-condensing)
Operating Temperature : 5oC to 50oC (41oF to 122oF)
Storage Temperature : -25oC to 70oC (-13oF to 158oF) Included in Package
1 - M.2 SSD RAID controller card
1 - low-profile bracket
2 - M.2 mounting screws
1 - quick-start guide Item Dimension (L inchxW inchxH inch)
9 x 7 x 2

Weight
1.00 lb

Warranty Information
2 Year Warranty


















































  • Weight:
  • UPC:
  • Condition:
  • Manufacturer:
  • Mfg#:

Updated: Dec 05, 2022
Added: Dec 23, 2016
Wt: 1.00 lbs

Request For Quote.


Startech PEXM2SAT3422 Controller Card 2xm.2 Ngff Ssd Raid Controller Card With 2xsata3 Ports Retail

PEXM2SAT3422

Your Opinion!