Cart

0 Product

Login Wishlist

0 item(s)

☰ Filter

×

Sort By

Consumer Electronics

Quantity

‐ In Stock

Categories

‐ Consumer Electronics

Airmar Consumer Electronics

Phone: (603) 673-9570

Airmar manufactures transducers for most fishfinder and instrument makers in the marine electronics industry. Airmar's extensive product-line includes thru-hull, in-hull, transom-mount, and external-mount transducers; NMEA 0183 and 2000 Smart™ Sensors; as well as temperature and speed sensors and WeatherStation® Instruments. And now, Airmar's line of Broadband CHIRP® transducers!

Crows Foot Transducer Wrench

$42.97

MFG: Airmar

MFG. Part: 60WR-1

SKU: UG0HVV68YP

Condition: New

Double Handle Transducer Wrench

$62.62

MFG: Airmar

MFG. Part: 75WR-3

SKU: V2PIPQ0EOX

Condition: New

P66 Transom Mounting Bracket 2004 Up

$37.93

MFG: Airmar

MFG. Part: 33-479-01

SKU: Z6S2585ZBB

UPC: 801769004656

Condition: New

Transducer Housing Wrench

$46.30

MFG: Airmar

MFG. Part: 175WR-4

SKU: AILL09DWUB

Condition: New

B175m 12 Degree Chirp Bronze Thru Hull 1kw

$984.07

MFG: Airmar

MFG. Part: B175C-12-M-MM

SKU: OUFKSR9KR2

UPC: 801769001884

Condition: New

Navico 9pin Dual Mix Match Cable For Dual Element Transducersfor Dualsocket Navicolowrancesimrad Xsonic 9pin Equipment Mix And Match Cables For Chirp Transducersmany Chirp Transducers Are Now Made As Mix And Match Models. These Versions Have A Common Base Transducer With An Attached 9meter Cable Plus An Interchangeable Short 1meter Brandspecific Adapter Cable.the Permanentlyattached 9meter Cable Ends In An 12pin Connector. This Cable Is Run Up Through The Boat To The Equipment Location. The Short Adapter Cable Connects To The Transducer Cable At One End And To The Equipment At The Other End.both Parts Are Needed For An Installation. If The User Changes Equipment Brand At Some Later Time The Transducer And Its Attached Cable Can Be Left In Place And Only The Adapter Cable Needs To Be Replaced.note That Chirp Mix And Match Cables Cannot Be Used With Conventional 50200khz Transducers.

$96.35

MFG: Airmar

MFG. Part: MMC-9N2

SKU: BWMVKAA145

UPC: 801769003352

Condition: New

Raymarine 11pin High Or Med Mix Match Transducer Chirp Cable For Cp470 Mmc11r Chirp Mix And Match Transducer Cable 1m Raymarine 11pin.for Use With 's High Or Med Single Band Mix And Match Chirp Transducers Up To 1kw 1000 Watt.

$96.35

MFG: Airmar

MFG. Part: MMC-11R-HM

SKU: S42A63LMV2

UPC: 801769003369

Condition: New

Crows Foot Transducer Wrench

$44.26

MFG: Airmar

MFG. Part: 75WR-1

SKU: YQTEJII258

Condition: New

B275clhw Bronze Thru Hull Chirp Ducer 9m Cable

$1885.56

MFG: Airmar

MFG. Part: B275C-LHW-MM

SKU: AEQ7KGA0V1

UPC: 801769001952

Condition: New

235 Khz Low Profile Tilted Element153; Smart153; Sensor 20176; Tilt Bronze Nmea 2000

$446.69

MFG: Airmar

MFG. Part: DT820BV-235-N2

SKU: AQIDZN5XDH

UPC: 801769004328

Condition: New

Transducer Housing Wrench

$44.26

MFG: Airmar

MFG. Part: 60WR-4

SKU: B8N2WZTXI1

Condition: New

Nmea 2000 Cable Fheading Sensor Weather

$96.83

MFG: Airmar

MFG. Part: WS2-C06

SKU: E5K9OMU1WS

UPC: 801769002980

Condition: New

Double Handle Transducer Wrench

$62.33

MFG: Airmar

MFG. Part: 60WR-3

SKU: V1BY8IJGDT

Condition: New

B265lh Bronze Chirp Thru Hull 1kw

$1313.44

MFG: Airmar

MFG. Part: B265C-LH-MM

SKU: WKVPTZFONL

UPC: 801769001419

Condition: New

Double Handle Transducer Wrench

$62.33

MFG: Airmar

MFG. Part: 117WR-3

SKU: Y52W2PPULL

Condition: New

B75m Bronze Chirp Thru Hull 20deg; Tilt 600w Requires Mix And Match Cable

$694.78

MFG: Airmar

MFG. Part: B75C-20-M-MM

SKU: ZKOOCXK7WX

UPC: 801769001792

Condition: New

Transducer Housing Wrench

$42.05

MFG: Airmar

MFG. Part: 75WR-4

SKU: EUAS3C6PTT

Condition: New

P79 Inhull Transducer Whumminbird 9 Plug 7pinour P79 Inhull Transducer Easily Adjusts To Hull Dead Rise Angles Up To 22186;. This Ensures That The Beam Is Vertically Oriented To Receive Echoes Resulting In Accurate Depth Readings. Unlike Traditional Puck Type Transducers Our P79 Consists Of A Base That Is Bonded To The Hull And Filled With Liquid. The Separate Transducer Then Attaches To The Base With A Twist Lock. The Sound Waves Travel More Efficiently Though The Liquid Giving The Best Possible Performance.features:adjusts To Hull Deadrise Angles From 2176; To 22176;no Holes To Drilldepth Onlyrecommended For Solid Fiberglass Hullsadheres To Aluminum Hulls Under 3.8 Mm 0.16 Thickrecommended For Planinghull Power Boats Trailered Boats Rigid Inflatable Boats Ribs And Racing Sailboatsno Hull Protrusionsboat Size: Up To 8m 25'specifications:weight

$162.92

MFG: Airmar

MFG. Part: P79-HB

SKU: F25NW0HWPF

Condition: New

Nmea2000 Cable 30mweatherstation Cables Are Available In Four Versions: Nmea 0183 Nmea 2000 Combined Nmea 0183 And 2000 And Furuno Nmea 0183. All Cables Have A Round White Connector At One End That Fits Into The Base Of A Weather Station.nmea 2000 Cables End In A Standard Male Nmea 2000 5pin Connector. If The Cable Is Longer Than 6 Meters It Contains A Builtin Termination Resistor And Is Intended To Be Used As An Extension Of The Network Backbone.nmea 0183 Cables End In An 8pin Connector Cx128 Which Can Be Removed If Necessary.combined Cables End In An 8pin Connector And Are Supplied With An Splitter Box That Has Nmea 0183 And Nmea 2000 Output Ports.furuno Cables End In A 7pin Furuno Connector And Are Designed To Plug Into Furuno Nmea 0183 Equipment.with Nmea 2000 Output Only. End In A Standard Male 5pin Nmea 2000 Connector.

$192.11

MFG: Airmar

MFG. Part: WS2-C30

SKU: KO1B5CLX5G

Condition: New

Nmea2000 Cable 10mweatherstation Cables Are Available In Four Versions: Nmea 0183 Nmea 2000 Combined Nmea 0183 And 2000 And Furuno Nmea 0183. All Cables Have A Round White Connector At One End That Fits Into The Base Of A Weather Station.nmea 2000 Cables End In A Standard Male Nmea 2000 5pin Connector. If The Cable Is Longer Than 6 Meters It Contains A Builtin Termination Resistor And Is Intended To Be Used As An Extension Of The Network Backbone.nmea 0183 Cables End In An 8pin Connector Cx128 Which Can Be Removed If Necessary.combined Cables End In An 8pin Connector And Are Supplied With An Splitter Box That Has Nmea 0183 And Nmea 2000 Output Ports.furuno Cables End In A 7pin Furuno Connector And Are Designed To Plug Into Furuno Nmea 0183 Equipment. With Nmea 2000 Output Only. End In A Standard Male 5pin Nmea 2000 Connector.

$119.68

MFG: Airmar

MFG. Part: WS2-C10

SKU: M202R57H9J

UPC: 801769003000

Condition: New

Transducer Housing Wrench

$59.38

MFG: Airmar

MFG. Part: 117WR-4

SKU: MCI5448B11

Condition: New

Dst800 Ducer Bronze Thru Hull Depthspeed Amp; Temp

$385.99

MFG: Airmar

MFG. Part: DST800BV-N2

SKU: N9KQW246JZ

Condition: New

SS175C-20-HW-MM

SS175C-20-HW-MM

Ss175hw 20 Degree Stainless Steel Thru Hull 1kw

$1459.74

MFG: Airmar

MFG. Part: SS175C-20-HW-MM

SKU: OXYDAJFUJB

UPC: 801769002171

Condition: New

Garmin 12pin Mix Match Cable Fchirp Transducers

$96.35

MFG: Airmar

MFG. Part: MMC-12G

SKU: QMI6GY42ZJ

UPC: 801769003239

Condition: New

Crows Foot Transducer Wrench

$42.97

MFG. Part: 60WR-1

SKU: UG0HVV68YP

Condition: New

Double Handle Transducer Wrench

$62.62

MFG. Part: 75WR-3

SKU: V2PIPQ0EOX

Condition: New

P66 Transom Mounting Bracket 2004 Up

$37.93

MFG. Part: 33-479-01

SKU: Z6S2585ZBB

Condition: New

Transducer Housing Wrench

$46.30

MFG. Part: 175WR-4

SKU: AILL09DWUB

Condition: New

B175m 12 Degree Chirp Bronze Thru Hull 1kw

$984.07

MFG. Part: B175C-12-M-MM

SKU: OUFKSR9KR2

Condition: New

Navico 9pin Dual Mix Match Cable For Dual Element Transducersfor Dualsocket Navicolowrancesimrad Xsonic 9pin Equipment Mix And Match Cables For Chirp Transducersmany Chirp Transducers Are Now Made As Mix And Match Models. These Versions Have A Common Base Transducer With An Attached 9meter Cable Plus An Interchangeable Short 1meter Brandspecific Adapter Cable.the Permanentlyattached 9meter Cable Ends In An 12pin Connector. This Cable Is Run Up Through The Boat To The Equipment Location. The Short Adapter Cable Connects To The Transducer Cable At One End And To The Equipment At The Other End.both Parts Are Needed For An Installation. If The User Changes Equipment Brand At Some Later Time The Transducer And Its Attached Cable Can Be Left In Place And Only The Adapter Cable Needs To Be Replaced.note That Chirp Mix And Match Cables Cannot Be Used With Conventional 50200khz Transducers.

$96.35

MFG. Part: MMC-9N2

SKU: BWMVKAA145

Condition: New

Raymarine 11pin High Or Med Mix Match Transducer Chirp Cable For Cp470 Mmc11r Chirp Mix And Match Transducer Cable 1m Raymarine 11pin.for Use With 's High Or Med Single Band Mix And Match Chirp Transducers Up To 1kw 1000 Watt.

$96.35

MFG. Part: MMC-11R-HM

SKU: S42A63LMV2

Condition: New

Crows Foot Transducer Wrench

$44.26

MFG. Part: 75WR-1

SKU: YQTEJII258

Condition: New

B275clhw Bronze Thru Hull Chirp Ducer 9m Cable

$1885.56

MFG. Part: B275C-LHW-MM

SKU: AEQ7KGA0V1

Condition: New

235 Khz Low Profile Tilted Element153; Smart153; Sensor 20176; Tilt Bronze Nmea 2000

$446.69

MFG. Part: DT820BV-235-N2

SKU: AQIDZN5XDH

Condition: New

Transducer Housing Wrench

$44.26

MFG. Part: 60WR-4

SKU: B8N2WZTXI1

Condition: New

Nmea 2000 Cable Fheading Sensor Weather

$96.83

MFG. Part: WS2-C06

SKU: E5K9OMU1WS

Condition: New

Double Handle Transducer Wrench

$62.33

MFG. Part: 60WR-3

SKU: V1BY8IJGDT

Condition: New

B265lh Bronze Chirp Thru Hull 1kw

$1313.44

MFG. Part: B265C-LH-MM

SKU: WKVPTZFONL

Condition: New

Double Handle Transducer Wrench

$62.33

MFG. Part: 117WR-3

SKU: Y52W2PPULL

Condition: New

B75m Bronze Chirp Thru Hull 20deg; Tilt 600w Requires Mix And Match Cable

$694.78

MFG. Part: B75C-20-M-MM

SKU: ZKOOCXK7WX

Condition: New

Transducer Housing Wrench

$42.05

MFG. Part: 75WR-4

SKU: EUAS3C6PTT

Condition: New

P79 Inhull Transducer Whumminbird 9 Plug 7pinour P79 Inhull Transducer Easily Adjusts To Hull Dead Rise Angles Up To 22186;. This Ensures That The Beam Is Vertically Oriented To Receive Echoes Resulting In Accurate Depth Readings. Unlike Traditional Puck Type Transducers Our P79 Consists Of A Base That Is Bonded To The Hull And Filled With Liquid. The Separate Transducer Then Attaches To The Base With A Twist Lock. The Sound Waves Travel More Efficiently Though The Liquid Giving The Best Possible Performance.features:adjusts To Hull Deadrise Angles From 2176; To 22176;no Holes To Drilldepth Onlyrecommended For Solid Fiberglass Hullsadheres To Aluminum Hulls Under 3.8 Mm 0.16 Thickrecommended For Planinghull Power Boats Trailered Boats Rigid Inflatable Boats Ribs And Racing Sailboatsno Hull Protrusionsboat Size: Up To 8m 25'specifications:weight

$162.92

MFG. Part: P79-HB

SKU: F25NW0HWPF

Condition: New

Nmea2000 Cable 30mweatherstation Cables Are Available In Four Versions: Nmea 0183 Nmea 2000 Combined Nmea 0183 And 2000 And Furuno Nmea 0183. All Cables Have A Round White Connector At One End That Fits Into The Base Of A Weather Station.nmea 2000 Cables End In A Standard Male Nmea 2000 5pin Connector. If The Cable Is Longer Than 6 Meters It Contains A Builtin Termination Resistor And Is Intended To Be Used As An Extension Of The Network Backbone.nmea 0183 Cables End In An 8pin Connector Cx128 Which Can Be Removed If Necessary.combined Cables End In An 8pin Connector And Are Supplied With An Splitter Box That Has Nmea 0183 And Nmea 2000 Output Ports.furuno Cables End In A 7pin Furuno Connector And Are Designed To Plug Into Furuno Nmea 0183 Equipment.with Nmea 2000 Output Only. End In A Standard Male 5pin Nmea 2000 Connector.

$192.11

MFG. Part: WS2-C30

SKU: KO1B5CLX5G

Condition: New

Nmea2000 Cable 10mweatherstation Cables Are Available In Four Versions: Nmea 0183 Nmea 2000 Combined Nmea 0183 And 2000 And Furuno Nmea 0183. All Cables Have A Round White Connector At One End That Fits Into The Base Of A Weather Station.nmea 2000 Cables End In A Standard Male Nmea 2000 5pin Connector. If The Cable Is Longer Than 6 Meters It Contains A Builtin Termination Resistor And Is Intended To Be Used As An Extension Of The Network Backbone.nmea 0183 Cables End In An 8pin Connector Cx128 Which Can Be Removed If Necessary.combined Cables End In An 8pin Connector And Are Supplied With An Splitter Box That Has Nmea 0183 And Nmea 2000 Output Ports.furuno Cables End In A 7pin Furuno Connector And Are Designed To Plug Into Furuno Nmea 0183 Equipment. With Nmea 2000 Output Only. End In A Standard Male 5pin Nmea 2000 Connector.

$119.68

MFG. Part: WS2-C10

SKU: M202R57H9J

Condition: New

Transducer Housing Wrench

$59.38

MFG. Part: 117WR-4

SKU: MCI5448B11

Condition: New

Dst800 Ducer Bronze Thru Hull Depthspeed Amp; Temp

$385.99

MFG. Part: DST800BV-N2

SKU: N9KQW246JZ

Condition: New

SS175C-20-HW-MM

Ss175hw 20 Degree Stainless Steel Thru Hull 1kw

$1459.74

MFG. Part: SS175C-20-HW-MM

SKU: OXYDAJFUJB

Condition: New

Garmin 12pin Mix Match Cable Fchirp Transducers

$96.35

MFG. Part: MMC-12G

SKU: QMI6GY42ZJ

Condition: New

Showing 1-24 of 27 item(s)

Top Brands