Refurbished Isr6140 W 2 Fc Pt 2 Iscsi Pt 512 Iscsi Ps ISR6140-CK

Rated: 5.00 of 1 Total Vote
USD 8044.25 OutOfStock
ISR6140-CK
Suggested Retail $ 10971.00
Call 800-511-7525
Last Sale Price $8044.25
Product Availability Email Alert
Availability: Special Order
AZTEK SKU #: 475892
Condition: Refurbished
Specification
Email Page
ISR6140 W/2 FC PT 2 ISCSI PT 512 ISCSI PS Today, densely deployed 1U rack servers are the instruments of choice to build an array of compute nodes for High Performance Computing (HPC) Linux clusters. Most of these servers live with Direct Attached Storage (DAS) in the form of local disks as a Storage Area Network (SAN) requires an investment in redundant Fiber channel connectivity which would drive up the procurement cost. These applications typically do not require the storage I/O performance offered by Fiber channel. The QLogic SANbox 6140 offers a cost-effective and elegant solution to route requests from iSCSI based servers to Fiber channel based disk or tape storage. The QLogic SANbox 6140 comes in a compact form factor (1/2U wide, 1U high), consumes less than 48 watts of power and is a low cost solution. Despite all this, there is no trade-off in terms of performance. The SANbox 6140 can deliver near line rate performance with 8K storage IO which is typical of most storage applications. The compact design of the SANbox 6140 allows two intelligent storage routers to be placed alongside each other in a 1U rack space. Servers can now use freely available iSCSI software initiators over the built-in Gigabit Ethernet interfaces to access Fiber channel based SAN-attached storage using the SANbox 6140 as the iSCSI to Fiber Channel router. In addition, this solution works transparently with most multi-path load balancing software products available on the market today allowing for a highly available redundant solution. In doing so, the SANbox 6140 provides a low cost way to migrate 1U rack servers from using DAS to using SAN and thus access all storage services typically deployed in a SAN. Considering that local disks typically account for most of the failures in 1U rack servers, the above solution provides a way to do away with local disks by deploying all the storage in SAN-attached Fiber channel disks which would be far more reliable and re-purposable than local disks.   Product DescriptionQLogic SANbox 6140 - router Device TypeRouter Form FactorExternal - 1U Dimensions (WxDxH)7 in x 9.6 in x 1.7 in Data Transfer Rate2 Gbps Data Link ProtocolGigabit Ethernet, Fibre Channel Network / Transport ProtocoliSCSI, FCIP Remote Management ProtocolSNMP FeaturesAuto-negotiation, full duplex mode PowerAC 120/230 V ( 50 - 60 Hz ) System RequirementsSunSoft Solaris, Linux, Microsoft Windows General Device TypeRouter Form FactorExternal - 1U Width7 in Depth9.6 in Height1.7 in Networking Connectivity TechnologyWired Data Transfer Rate2 Gbps Fibre ChannelFC-SW-2 Data Link ProtocolGigabit Ethernet, Fibre Channel Network / Transport ProtocoliSCSI, FCIP Remote Management ProtocolSNMP Communication ModeHalf-duplex, full-duplex FeaturesAuto-negotiation, full duplex mode Expansion / Connectivity Interfaces2 x network - Ethernet 1000Base-T - RJ-45
2 x network - Fibre Channel
1 x management - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - RS-232 - RJ-45 Miscellaneous Rack Mounting KitOptional Compliant StandardsCE, FCC Class A certified, UL, TUV, VCCI, CISPR 22 Class A, cUL, EN 60950, EN 61000-3-2, ICES-003, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, FCC Part 15 B, FCC Part 15 Power Power DevicePower supply - internal Installed Qty / Max Supported Qty1 (installed) / 1 (max) Voltage RequiredAC 120/230 V ( 50 - 60 Hz ) Power Consumption Operational48 Watt Software / System Requirements OS RequiredSunSoft Solaris, Linux, Microsoft Windows Environmental Parameters Min Operating Temperature41 °F Max Operating Temperature104 °F Humidity Range Operating5 - 90%

ATDZUID
VoipOver
FeedBack
Processing time: 0.6127 seconds