Refurbished Nine Pt 10 100 Ethernet Switch I F Card HWIC-D-9ESW

Rated: 5.00 of 1 Total Vote
USD 900.00 OutOfStock
HWIC-D-9ESW
Suggested Retail $ 1125
Call 800-511-7525
Last Sale Price $900.00
Product Availability Email Alert
Availability: Special Order
AZTEK SKU #: 297563
Condition: Refurbished
Specification
Email Page
NINE PT 10/100 ETH SWCH I/F CARD
Cisco EtherSwitch HWICs are 10/100BaseT Layer 2 Ethernet switches with Layer 3 routing capability. (Layer 3 routing is forwarded to the host, and is not actually performed at the switch.). Traffic between different VLANs on a switch is routed through the router platform. Any one port on a Cisco EtherSwitch HWIC may be configured as a stacking port to link to another Cisco EtherSwitch HWIC or EtherSwitch network module in the same system. An optional power module can also be added to provide inline power for IP telephones.
Product Description Cisco EtherSwitch HWIC - switch - 9 ports
Device Type Switch
Form Factor Plug-in module
Dimensions (WxDxH) 6.2 in x 4.7 in x 0.7 in
Weight 0.2 lbs
Ports Qty 9 x Ethernet 10Base-T, Ethernet 100Base-TX
Data Transfer Rate 100 Mbps
Data Link Protocol Ethernet, Fast Ethernet
Remote Management Protocol SNMP 1, SNMP 2, Telnet, SNMP 3
Communication Mode Half-duplex, full-duplex
Features Flow control, full duplex capability, layer 2 switching, auto-sensing per device, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE♊.3x, IEEE 802.1x
System Requirements Cisco IOS 12.3(8)T
General
Device Type Switch
Enclosure Type Plug-in module
Width 6.2 in
Depth 4.7 in
Height 0.7 in
Weight 0.2 lbs
Networking
Ports Qty 9 x Ethernet 10Base-T, Ethernet 100Base-TX
Data Transfer Rate 100 Mbps
Data Link Protocol Ethernet, Fast Ethernet
Remote Management Protocol SNMP 1, SNMP 2, Telnet, SNMP 3
Connectivity Technology Wired
Communication Mode Half-duplex, full-duplex
Switching Protocol Ethernet
Status Indicators Port status
Features Flow control, full duplex capability, layer 2 switching, auto-sensing per device, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE♊.3x, IEEE 802.1x
Expansion / Connectivity
Interfaces 9 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Compatible Slots 1 x expansion slot
Software / System Requirements
OS Required Cisco IOS 12.3(8)T
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 85%
TBDIU
VoipOver
FeedBack
Processing time: 0.8135 seconds