Refurbished Spi Fsp180 50plar 180w Flex Atx12v 4cm Ball Bearing Fan 20 Pin Active Pfc Rohs FSP180-50PLAR

Rated: 5.00 of 1 Total Vote
USD 71.25 OutOfStock
FSP180-50PLAR
Suggested Retail $ 89.06
Call 800-511-7525
Last Sale Price $71.25
Product Availability Email Alert
Availability: Special Order
AZTEK SKU #: 2395832
Condition: Refurbished
Specification
Email Page
SPI FSP180-50PLAR 180W Flex ATX12V 4cm Ball-bearing Fan 20-Pin Active PFC ROHS Sparkle Power (SPI) 180W Flex-ATX12V With RoHS & PFC Switching Power Supply with Active PFC & RoHS Compliant). Vendor: Sparkle Power Inc. MPN: FSP180-50PLAR UPC: 677808610221 Key Features AC Input - 90V - 265V Dimensions WxDxH - 81.5 x 150 x 40.5mm Fan Features - 4 cm Fan Form Factor - Flex ATX MTBF - 100,000 Hours Output Power - 180 W Warranty - 1 Year Detail Specifications Features: Complied with Flex ATX and ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Remote ON/OFF function Internal 12V DC fan included Noise Killer (thermal fan speed control function) Low noise and ripple Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE Input Characteristics : Input Range: 90 ~ 265Vac (RMS), Full Range Input Frequency: 47 ~ 63Hz Input Current: 4A (RMS) @115Vac, 2A (RMS) @230Vac Inrush Current: 50A Max @115Vac, 80A Max @230Vac cold start Output Characteristics: Output Voltage: +3.3V, Min. load: 0.3A, Max. load: 16.8A , Load Reg: 5%, Ripple & Noise: 50mV P-P Output Voltage: +5V, Min. load: 0.3A, Max. load: 12A , Load Reg: 5%, Ripple & Noise: 50mV P-P Output Voltage: +12V, Min. load: 1.5A, Max. load: 10A , Load Reg: 5%, Ripple & Noise: 120mV P-P Output Voltage: -12V, Min. load: 0.0A, Max. load: 0.8A , Load Reg: 10%, Ripple & Noise: 120mV P-P Output Voltage: +5Vsb, Min. load: 0.0A, load: 2.0A, Load Reg: 5%, Ripple & Noise: 50mV P-P Specification: Temperature Range: Operating: 0C ~ +50C on full load; storage & shipping: -20C ~ +80C Humidity: 5 ~ 95% on operating and storage Dielectric Withstand: Input to frame ground 1800 VAC for 2 second Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all outputs Rise time: Less than 20ms Hold-up Time: 17ms minimum at nominal input voltage Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible) Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz MTBF: 100,000 hours on maximum load at +25C Dimensions (LxWxH): 150x81.5x40.5mm/6x3.2x1.6in Warranty -- 1 Year
VoipOver
FeedBack
Processing time: 0.5218 seconds