Manufacturer:Transition Networks, IncManufacturer Part Number:E-100BTX-FX-05(SC)Manufacturer Website Address:www.transition.comBrand Name:Transition NetworksProduct Model:E-100BTX-FX-05(SC)Product Name:100BASE-TX to 100BASE-FX Media ConverterMarketing Information:Transition Networks' 100BASE-TX to⎌BASE-FX Media Converter makes cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.Product Type:Media ConverterInterfaces/PortsNumber of Ports:Interfaces/Ports:1 x RJ-45Media & PerformanceConnectivity:STP/UTP FiberConnectivity Media:100Base-TX Category 5 STP/UTP 100Base-FX 1300 nm Multi-mode FiberDistance Support:1.24 MileNetwork & CommunicationNetwork Technology:100Base-TX⎌Base-FXManagement alerting the device on the same side as the failure. The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because Auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without our converters. Enabling the Pause feature on the converters betwen two switches allows users to take advantage of this flow control feature on their equipment.Auto-Cross: AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.N-Way Auto-Negotiation: Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter, unlike competitive products that ship in Auto-Negotiation mode and may require both hardware and software configuration.Fiber Cable: Bit error rate: < 10-9 Fiber Optic Cable Recommended:- 62.5 / 125 µm multimode fiber Optional:- 100 / 140, 85 / 125 , 50 / 125 µm multimode fiberFiber Optic Connector: Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.0 dBSwitches: SW1: Auto-Negotiation On/Off SW2: Pause TX On/Off SW3: LPT On/Off SW4: FEF On/OfJumpers: Jumper Block 1: Auto Cross enableCertifications & Standards:IEEE 802.3®⎌BASE-FX, 100BASE-TX UL Listed FCC Class A EN55024 EN55022 Class A EN61000 CE MarkWarrantyStandard Warranty:Lifetime LimitedParts Warranty/Labor:- LifetimeAdditional Warranty Information:Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable.This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services.