FETH 100BTX TO 100BFX MT-RJ MMF SA CONVRT 2KM Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before. The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure. The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.
Main Specifications Product DescriptionTransition media converter Device TypeMedia converter - RJ-45 / ST multi-mode Enclosure TypeExternal Dimensions (WxDxH)3 in x 4.7 in x 1 in Cabling Type100Base-FX, 100Base-TX Data Transfer Rate100 Mbps Optical Wave Length1300 nm Data Link ProtocolFast Ethernet Max Transfer Distance1.2 miles FeaturesAuto-negotiation Compliant StandardsIEEE 802.3u , CE, FCC Class A certified, UL, EN55024, EN55022 Class A Manufacturer WarrantyLimited lifetime warranty General Device TypeMedia converter Enclosure TypeExternal Width3 in Depth4.7 in Height1 in Networking Connectivity TechnologyWired Cabling Type100Base-FX, 100Base-TX Data Link ProtocolFast Ethernet Data Transfer Rate100 Mbps Optical Wave Length1300 nm Max Transfer Distance1.2 miles Status IndicatorsLink activity, power, link OK FeaturesAuto-negotiation Compliant StandardsIEEE 802.3u Expansion / Connectivity Interfaces1 x network - Ethernet 100Base-FX - ST multi-mode female x 2 1 x network - Ethernet 100Base-TX - RJ-45 female Connections1 x network - Ethernet 100Base-TX - RJ-45 male - 1 Miscellaneous Compliant StandardsCE, FCC Class A certified, UL, EN55024, EN55022 Class A Power Power DevicePower adapter - external Manufacturer Warranty Service & SupportLimited lifetime warranty Service & Support DetailsLimited warranty - lifetime Environmental Parameters Min Operating Temperature32 °F Max Operating Temperature122 °F Humidity Range Operating10 - 90%