Refurbished Trapeze Ap Mp 4322 Resell Use With R70 Software Or Later DR4001104E6

Rated: 5.00 of 1 Total Vote
USD 1521.26 OutOfStock
DR4001104E6
Suggested Retail $ 1910.33
Call 800-511-7525
Last Sale Price $1521.26
Product Availability Email Alert
Availability: Special Order
AZTEK SKU #: 580795
Condition: Refurbished
Specification
Email Page
TRAPEZE AP MP-4322 RESELL USE W/ R7.0 S/W OR LATER
The Trapeze Mobility Point (MP) family of multifunction access points provides wireless service for Trapeze Smart Mobile Wi-Fi wireless networks. Smart Mobile is the only WLAN architecture with intelligent switching, which combines both centralized and distributed traffic forwarding based on the requirements of the underlying application. The Trapeze Networks indoor MP-432 is a high performance♊.11n Multiple Input / Multiple Output (MIMO), dual radio access point. The MP-432 is the only enterprise-class 802.11n access point with built-in internal antennas to provide outstanding coverage and range enhancements without having to configure "rabbit ear" antennas. The MP-432 is the only AP in the industry that features twoΎ/100/1000 Ethernet ports for redundant data connectivity and redundant Power over Ethernet (PoE). The Gigabit Ethernet ports run in auto-negotiation mode to seamlessly adapt to the Ethernet infrastructure. As part of the Smart Mobile system, the MP-432 is the only 802.11n AP in the industry that features "Always On" reliability. If a WLAN controller fails for any reason, the AP will seamlessly failover to another controller and maintain the wireless networking session. Even a voice over Wi-Fi session will continue without interruption or dropping the voice call. With organizations relying upon their Wi-Fi network as their primary point of network connectivity, such redundancy and uptime service guarantees are quickly becoming mandatory. The MP-432 can be mounted with the same mounting brackets used for legacy Trapeze Networks access points. The UL2043 rating of the MP-432 allows the access points to be placed above the ceiling tile in plenum areas regulated by municipal fire codes. Its enclosure design resembles a smoke detector to appear innocuous and minimize attention. The MP-432 does not store data, encryption keys or security credentials locally on the access point, and poses no security risk to the organization if stolen. A stolen MP-432 would be a useless inoperable device if not connected to an authorized network. The MP-432 is simple to deploy and easy to manage. It supports any wireless networking service over Wi-Fi - data, voice and video. To enhance the quality of the connection, the MP-432 automatically calculates the integrity and RF signal strength of the wireless channel, continually tuning for the optimal RF channel and transmit power. The MP-432 plays an important role in wireless intrusion detection systems and wireless intrusion prevention systems as well as denial-of-service attack detection and prevention.
Product Description Trapeze Indoor Mobility Point MP-432 - wireless access point
Device Type Wireless access point
Enclosure Type External
Dimensions (WxDxH) 8.1 in x 8.1 in x 3.2 in
Weight 1.8 lbs
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Features Hardware encryption, power over Ethernet (PoE), load balancing, VLAN support, DoS attack prevention, Intrusion Detection System (IDS), Intrusion Prevention System (IPS), Wireless Distribution System (WDS) support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, SpectraLink Voice Priority (SVP) support, Quality of Service (QoS), Data prioritization (Qos) for VoIP applications, Multiple SSID support
Power Over Ethernet (PoE) Yes
General
Device Type Wireless access point
Width 8.1 in
Depth 8.1 in
Height 3.2 in
Weight 1.8 lbs
Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 600 Mbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Spread Spectrum Method OFDM, DSSS
Capacity Concurrent sessions : 500
Status Indicators Link activity, power
Features Hardware encryption, power over Ethernet (PoE), load balancing, VLAN support, DoS attack prevention, Intrusion Detection System (IDS), Intrusion Prevention System (IPS), Wireless Distribution System (WDS) support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, SpectraLink Voice Priority (SVP) support, Quality of Service (QoS), Data prioritization (Qos) for VoIP applications, Multiple SSID support
Encryption Algorithm AES, 128-bit WEP, 40-bit WEP, TKIP, WPA, WPA2
Authentication Method Radio Service Set ID (SSID)
Compliant Standards IEEE 802.3u, IEEE 802.3i, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n (draft 2.0), IEEE 802.11k, IEEE 802.3at
Antenna
Antenna Internal integrated
Antenna Qty 6
Directivity Omni-directional
Expansion / Connectivity
Interfaces 2 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
Miscellaneous
Compliant Standards ETSI, CE-LVD, CB, ICES-003 Class B, EN 301.489.1, EN 301.489.17, FCC Part 15 B, RSS-210, EMC, IC, UL 2043, EN 300.328-2, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, CSA C22.2 No. 60950-1-03, WEEE, EN⑕.893, EN 60601-1-2, ARIB STD-T66, ARIB STD-T70, RCR STD-33, TELEC
Power
VoipOver
FeedBack
Processing time: 0.5886 seconds